- 5 -
Powering the GigaSPIRE
To power the equipment:
1. Remove any protective packaging or fi lm prior to power-
ing up the GigaSPIRE.
2. Plug in the power adapter to any available wall socket
and attach the other end to the power port. Note the
power cord is 5 feet (1.5 meters) long.
Managing the GigaSPIRE
To manage the functions of the GigaSPIRE, an Embedded
Web Interface (EWI) is included. To access the EWI of the
GigaSPIRE, connect an Ethernet cable from your PC to the
GigaSPIRE and enter the default IP Address of the device
(192.168.1.1)
Power In (2-Pin Barrel)
7903
To Next Page
Loading...
