Calix T076G - Web GUI Access Through LAN Ports

12
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
Web GUI Access Through LAN Ports
Before accessing ONT, make sure that PC properly connects to the ONT. Then, do the
following configurations and operations:
1. Connect PC LAN port and ONT LAN1 port with a standard Ethernet Cable
2. Configure IP address of PC through one of the following ways: Configure IP address,
mask, and gateway address. For example:
 Obtain an IP address automatically. In this case, the PC will obtain an IP address
from ONT through DHCP
 Configure static IP address for PC
 IP address: 192.168.1.X (2-254)
 Mask: 255.255.255.0
 Gateway address: 192.168.1.1
Note: Make the configurations based on actual ONT versions.
3. Ping the ONT IP address (Default is 192.168.1.1).