Need help?Do you have a question about the Calnex Paragon-neo and is the answer not in the manual?
Details warnings and cautions for safe operation, preventing injury and equipment damage.
Covers document revision, copyright, and warranty disclaimers.
Provides an overview of the Calnex Paragon-neo, its capabilities, and supported configurations.
Defines key terms and acronyms used throughout the document for clarity and consistent understanding.
Lists essential accessories and documentation included with the Paragon-neo upon purchase.
Details technical specifications, environmental requirements, and operational parameters for the instrument.
Outlines the recommended method for cleaning the Paragon-neo to maintain its condition and performance.
Provides guidance on original packaging for transport and implications of using alternative packaging.
Explains equipment labels and provides instructions for environmentally responsible disposal.
Illustrates and labels front panel components and connectors for first generation NRZ models.
Illustrates and labels front panel components and connectors for second generation NRZ models.
Illustrates and labels front panel components and connectors for the Paragon-neo R model.
Illustrates and labels front panel components and connectors for Paragon-neo PAM4 models.
Details the function of the on/off switch and other basic control elements on the front panel.
Covers Ethernet port types, media compatibility, and potential port assignments for various models.
Details balanced and unbalanced clock reference inputs, signal types, impedance, and voltage specifications.
Details balanced and unbalanced 1PPS and ToD reference inputs, including pinouts and voltage requirements.
Describes unbalanced clock reference outputs, including signal levels and impedance.
Details 1PPS/ToD reference outputs, including signal types, voltage, and impedance.
Describes RJ48 balanced and BNC unbalanced test output connectors for 1PPS/ToD and clock signals.
Details RJ48 balanced and BNC unbalanced inputs for clock frequency measurements.
Details RJ48 balanced and BNC unbalanced inputs for 1PPS and ToD measurements.
Explains status display, buttons for IP config, and the reset switch function.
Details LAN, USB ports for connectivity, and diagnostic ports which should not be connected.
Details the AC power inlet for connecting the power cord and the AC power switch.
Notes that GPS antenna and high-speed data ports are not used and should not be connected.
Discusses NRZ transceivers, their latency characteristics, and suitability for timing measurements.
Explains PAM4 transceivers, their latency issues, and the need for Calnex-qualified options.
Provides step-by-step instructions for connecting the Paragon-neo to a network using DHCP for IP address assignment.
Guides users on configuring a static IP address for the Paragon-neo to connect to a network.
Explains how to directly connect the Paragon-neo to a PC using a static IP address for configuration.
Details how to access the Paragon-neo Graphical User Interface (GUI) through a web browser using its IP address.
Provides instructions for powering on the Paragon-neo and connecting to its interface.
Introduces the Paragon-neo's web-based user interface, including key application sections.
Details the procedure for safely shutting down or restarting the instrument.
Explains where to find the instrument's software version and serial number in the GUI.
Setting reference/seed times and configuring reference/measurement ports for testing.
Main control screen for running tests and understanding status indicator meanings.
Explains activity indicators, global measurement controls, and analysis tools.
Details script recording for automation and the context-sensitive quick help feature.
Steps to launch the GUI, select a test mode, and configure time sources for testing.
Setting the time source for PTP Emulation and Time of Day Generation.
Configuring clock reference and 1PPS/ToD reference selectors and parameters.
Selecting and configuring Ethernet port details and checking link status indicators.
Running applications, configuring parameters, and initiating measurements with Generate/Measure buttons.
Procedure for stopping an active measurement test by clicking the Stop button.
Using the CAT tool to display and analyze timing measurements.
Using the PFV tool for protocol analysis of captured data.
Enables real-time plotting and analysis of measurement data on a PC using standalone software.
Details enabling and configuring secure HTTP/HTTPS connections and managing security certificates.
Explains enabling and disabling Samba for remote file access to settings and measurement data.
Details the external converter, its functions, specifications, and connection options.
Details the GUI's Quick Help panel and access to online resources like the support website and FAQs.
Instructions for generating and submitting diagnostic log files for technical support.
General| Brand | Calnex |
|---|---|
| Model | Paragon-neo |
| Category | Test Equipment |
| Language | English |
To Next Page
