Need help?Do you have a question about the Calorex Pro-Pac PPT140BHC and is the answer not in the manual?
General| Model | Pro-Pac PPT140BHC |
|---|---|
| Category | Heat Pump |
| Heating Capacity | 14.0 kW |
| Refrigerant | R32 |
| Power Supply | 230V/1Ph/50Hz |
| Maximum Water Flow Temperature | 60°C |
| Sound Power Level | 62 dB(A) |
Provides guidelines for selecting an appropriate location, clearance, and environmental considerations.
Details requirements for unobstructed air inlet/outlet and free area specifications for models.
Explains water circuit connection, sizes, and condensate drainage for the heat pump.
Describes methods for setting correct water flow rate using flow meters or pressure gauges.
Covers electrical supply, cable sizing, earthing, and protection measures for safe installation.
Provides recommended electrical wiring diagrams for single and three-phase water pump installations.
Detailed circuit diagram for the PP(T)30BHC model, showing component interconnections.
Detailed circuit diagram for the PP(T)45BHC model, showing component interconnections.
Checklist for diagnosing common issues when the unit does not operate or operates intermittently.
Checklist for diagnosing common issues for larger models when the unit does not operate or operates intermittently.
Outlines the procedure for draining the heat pump to prevent frost and corrosion damage during winter.
Lists conditions and exclusions that may invalidate the heat pump warranty, including improper installation or maintenance.
To Next Page