Calpeda IDROMAT - UK Declaration of Conformity

ISTR_IDROMAT_Rev02
51 / 52
UK DECLARATION OF CONFORMITY
Manufacturer’s Name: Calpeda S.P.A.
Address: Via Roggia di Mezzo 39, 36050 Montorso Vicentino (VI) Italy
We Calpeda S.P.A. declare that:
the undersigned company certies under its sole responsibility that the pumps specied below satisfy the
following requirements of UK regulations.
Products Models : IDROMAT
UK Regulations:
Supply of Machinery (Safety) Regulations 2008
Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
2012
Applicable designated standards:
BS ISO 12100:2010; BS 809:1998+A1:2009
BS 60335-1:2012/A2:2019; BS 60335-2-41:2003/A2:2010
BS 55014-1:2017; BS 55014-2:2015; BS 61000-3-2:2014; BS 61000-3-3:2013/A1:2019
Personauthorisedtocompilethetechnicalle:
Mettifogo Marco
Calpeda S.p.A.
Via Roggia di Mezzo 39, 36050 Montorso Vicentino (VI) Italy
Montorso Vicentino - Italy – 02 March 2022
CALPEDA S.p.A.
Il Presidente
Marco Mettifogo
ISTR_IDROMAT_Rev02.indd 51ISTR_IDROMAT_Rev02.indd 51 03/03/22 14:3503/03/22 14:35