TIPS FOR SUCCESSFUL OPERATION
Blending Wand
Step 1: MAKE SURE BLENDER IS UNPLUGGED
Step 2: ATTACH MAIN BODY TO BLENDING WAND
Be sure attachment is fully engaged to the main body by rotating the
attachment clockwise until the units click together. The tick mark on the
wand should be lined up with the line on the side of the main body.
Step 3: ADD NONSTICK SAFE GUARD ATTACHMENT (Optional)
Attach the nonstick safe guard attachment to prevent damage while
blending in nonstick pans.
To attach, align the nonstick safe guard and the opening at the end of
the blending wand (near the blade), being careful not to touch the blade.
Slowly press the nonstick safe guard onto the end of the blending wand.
To detach, push in both tabs of the nonstick safe guard and slowly pull
it off of the blending wand, being careful not to place fingers inside the
blade housing. The nonstick safe guard is dishwasher safe, or can be hand
washed.
Step 4: PLACE INGREDIENTS IN MIXING BOWL
Choose a deep mixing bowl or container. Mixture will swell slightly as it
mixes, especially on higher speed settings, so allow extra room in the mixing
bowl to prevent spatters.
Step 5: INSERT THE POWER PLUG
Choose a suitable electrical outlet by referring to Electrical
Requirements on page 4.
7
To Next Page
Loading...
Need help?
General
