12/36
In addition to the safety regulations described in this section, please take note of all the
information provided in the manual of the lifting device onto which the equipment is to be
mounted.
Failure to comply with the basic safety norms or precautions may lead to accidents during
operation, maintenance or repair of the equipment.
It is often possible to avoid accidents by recognising potentially dangerous situations before
they occur. The operator must be aware of potential dangers and possess the training,
competence and equipment necessary to correctly carry out the work.
CAMattachments cannot under any circumstances be held responsible for accidents or
damage resulting from the use of the equipment by inadequately trained personnel or if
inappropriate use has been made of the same, as well as the, even partial, non-observance of
the safety norms and the intervention procedures contained in the present manual and in that
of your lifting device.
CAMattachments cannot envisage each possible circumstance that may result in danger.
Therefore, the warnings given in the publication and appearing on the equipment are not
exhaustive.
If equipment, procedures, work methods or working techniques are used that are not
specifically advised by CAMattachments, it is necessary to make sure that there is no danger
to the operator or other people.
To Next Page
Loading...
Need help?
General