cam PL Series User Manual

14/36
5. ASSEMBLY AND INSTALLATION
5.1. Packing list
Description Amount Reference
Equipment 1 See chapter 10.2
Operating manual 1 168TA2692
Spare parts list 1 See chapter 10.4
CE certificate 1 See chapter 10.1
5.2. Safety instructions for assembly and installation of the product
• Wear safety gloves and safety shoes when assembling the equipment.
• The assembly and installation must be carried out by an expert.
• Make sure that the goods and packaging are in good condition.
• Before commissioning, carry out a risk analysis of the assembly of the CAM attachment on
the forklift.
• Before using the equipment , carefully read the instructions in the manual of your lifting
device.
5.3. Assembly of the product
• Before installing the equipment, a thorough visual check must be carried out to make sure
that no damage occurred during the transportation and handling stage.
• If one or more components are damaged, it is necessary to notify CAMattachments and
agree on the measures to be taken.
PL & PL-T
1. Remove the packing materials carefully.
2. Place the equipment on a flat surface.
3. Remove the lower hooks on both sides as indicated in the diagrams below.

cam PL Series Specifications

General

Brand	cam
Model	PL Series
Category	Valve Positioners
Language	English