EasyManuals Logo

cam PL Series User Manual

cam PL Series
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4/36
Thank you for using our product. For your safety and to ensure a correct operation, we would like to
bring to your attention some aspects of this manual:
This booklet supplies instructions for the correct operation and maintenance of the product. It is
therefore necessary to pay the utmost attention to all of the paragraphs that illustrate the simplest
and most secure way to operate and use this product.
This booklet must be considered an integral part of the machine and must be included with the
deed of sale.
Neither this publication, nor part of it, can be reproduced without written authorisation on the part
of the manufacturer.
All of the information reported herein is based on data available at the moment of printing;
themanufacturer reserves the right to carry out modifications to its own products at any moment,
without notice and without incurring in any sanction. It is therefore suggested to always check for
possible updates.
The person responsible for the use of the product must make sure that all of the safety rules in force in
the country of its use are applied, to guarantee that the equipment is used in conformity with the use
for which it is destined and to avoid any dangerous situation for the user.
The following warning signs are used in this manual to warn you for dangers and risks:
Informative, be careful.
Warning, can lead to injury and damage if instructions aren’t followed.
Danger, can lead to serious or fatal injury and serious damage if instructions aren’t
followed.
The following conventions are used in this manual:
PL & PL-T Series
Convection
1 Top
2 Back
3 Left
4 Bottom
5 Front
6 Right
Unless otherwise stated, directions apply as seen from the operators control seat when facing
the attachment.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the cam PL Series and is the answer not in the manual?

cam PL Series Specifications

General IconGeneral
Brandcam
ModelPL Series
CategoryValve Positioners
LanguageEnglish