Charge the battery
10
REMOVE THE SD CARD AND PLUG THE USB CABLE
Carefully lift the rubber strip and then remove the SD card (if you
leave the SD card, the camera will automatically begin a recording
while charging). !
!
Then, plug in the USB cable and connect it to a power outlet
!
Once the camera is plugged to a power outlet, the status LED will
become solid red while the Cambox is charging
To optimize the lifespan of the battery, we advise not to charge the Cambox for more than 12h
straight
CAMBOX FULLY CHARGED
Once the Cambox is charged, the status LED switches off!
We advise to keep charging your Cambox for 30min - 1h after the
LED has switched off
CHARGE IN PROGRESS
To Next Page
Loading...
