Do you have a question about the Cambridge Audio CD5 and is the answer not in the manual?
Type | CD Player |
---|---|
Disc Compatibility | CD, CD-R, CD-RW |
Analog Output | 2V RMS |
Frequency Response | 20Hz - 20kHz |
Total Harmonic Distortion | <0.006% |
DAC | Wolfson Microelectronics WM8725 |
Digital Output | Coaxial and Optical |
Signal to Noise Ratio | >95dB |
Weight | 4.8kg |
Output Impedance | <50 Ohms |
Dimensions | 430 x 305 x 85mm |
Verify correct voltage and connection for safe operation.
Guidance on fitting a UK mains plug and fuse for safety.
Comprehensive instructions for safe installation and usage.
Information on compatible disc types for optimal playback.
Connect to amplifier's line level input using interconnect cables.
Connect the AC power cable for unit operation.
Connect to DAC or digital recorder via optical cable.
Switches the unit between On and Off states.
Opens/closes the disc tray and initiates playback.
Starts playback or pauses the current track.
Stops the CD playback.
Navigates between tracks and scans within tracks.
Skips forward/backward between MP3 folders on a CD.
Functions for Play/Pause, Stop, and Skip/Scan operations.
Navigates MP3 folders on the disc.
Controls for Program, Repeat, Random, and Intro functions.
Direct track selection using numerical keys.
Step-by-step guide to insert and remove discs from the player.
How to skip to specific tracks using Skip/Scan buttons.
Fast forward or rewind within a track using Skip/Scan.
Selecting tracks directly via numerical input on the remote.
Repeating a single track or the entire disc.
Repeating tracks within an MP3 folder or the entire album.
Playing tracks in a random order.
Playing the first ten seconds of each track.
Checks for power connection and fuse issues.
Checks for disc loading and condition issues.
Checks for amplifier and connection issues.
Checks for disc condition and player stability.
Checks for secure cable connections.
Checks batteries and remote sensor obstruction.