Need help?Do you have a question about the Cambridge Audio SX-50 and is the answer not in the manual?
Acoustic Features| sensitivity | 87dB |
|---|---|
| frequency response | 50Hz-22kHz |
| impedance | 8Ohms |
Drivers| drive units | 5.25" (135mm) doped matt paper cone woofer bass/mid driver |
|---|---|
| tweeter | 1" (25mm) Silk dome |
Power and Dimensions| recommended amplifier power | 10-100 Watts |
|---|---|
| speaker dimensions | 225 x 161 x 240mm |
| weight | 3.0kg (6.6lbs) |
Acoustic Features| sensitivity | 89dB |
|---|---|
| frequency response | 41Hz-22kHz |
| impedance | 8Ohms |
Drivers| drive units | 6.5" (165mm) treated matt paper cone woofer bass/mid driver |
|---|---|
| tweeter | 1" (25mm) Silk dome |
Power and Dimensions| recommended amplifier power | 20-100 Watts |
|---|---|
| speaker dimensions | 340 x 200 x 272mm |
| weight | 5.0kg (nibs) |
Details the 1" Silk Dome Tweeter and 5.25" Treated Paper Cone Driver on the front of the speaker.
Identifies the rear bass port and speaker connection terminals on the back of the speaker.
Instructions on connecting speakers using high-quality cable, emphasizing polarity.
Advice on using stands or shelves and maintaining a 5cm space behind speakers.
Guidance on using foam bungs in the rear port to adjust low frequency output.
Recommendations for speaker and listening position distance for best stereo imaging.
Explanation of speaker sensitivity (dB SPL) and its impact on loudness.
Definition of a crossover in loudspeakers and its function with multiple drivers.
Explanation of speaker impedance (Ohms) and its relation to amplifier load and power.
Steps to diagnose and resolve issues with no sound from one or both speaker channels.
Troubleshooting tips for sound distortion or inconsistent audio output from the speakers.
To Next Page
