Need help?Do you have a question about the Cambridge Audio C155 and is the answer not in the manual?
Mark mounting hole position using the template and test the area for obstructions.
Cut the hole, connect wiring with correct polarity, and secure the speaker using fixing screws.
Remove the magnetic grille carefully and paint it. Use a mask for the speaker surround.
Mark mounting hole position using the template and test the area for obstructions.
Cut the hole, connect wiring with correct polarity, and secure the speaker using fixing screws.
Remove the magnetic grille carefully and paint it. Use a mask for the speaker surround.
General| Type | Bookshelf |
|---|---|
| Configuration | 2-way |
| Impedance | 8 Ohms |
| Bass Driver | 5.25-inch |
| Tweeter | 1-inch |
To Next Page
