G2
PREMIUM
PORTABLE
BLUETOOTH
SPEAKER
Quick
Start
Guide
Important!
Connect the charging adaptor to the G2 and charge for
4 hours before first use.
Press and hold the power button
{!)
on the
top
of
the unit for
two
seconds to turn it on.
G2
Rear
view
On/Off
button
USB
socket
Volume
up
& down
/;
Charging
socket
Bluetooth
set
-up
NFC
Auxin
\..:AL
I
Ul
I
11
'-'
IV
Aux
bu~ton
Bluetooth
button
A'S
mode-@
Press the BT button 0 to select the Bluetooth input.
Pairing
your
device
manually
Phone
button
Press the BT button 0 to enter Bluetooth pairing mode. The flashing
I
blue
LED
~·~
indicates pairing mode.
I
Enable Bluetooth connectivity on your Bluetooth device
(eg.
phone,
tablet etc) and pair with the G2 (you may need
to
consult your
phone or
tablet operating instructions).
If
your
Bluetooth
device
is
NFC
enabled
You
may need to ensure Bluetooth
is
enabled on your device.
Touch your NFC device against the
logo
mJ.
G2 will enter automatic
pairing mode and 'G2'
should appear on your device.
To
talk to
us,
call
+44
(0)203 514 1521 (UK Local)
or
1-877-357-8204
(USA)
Pairing
a
second
device
GREAT
~
~
~
BRITISH -
..
·-•
SOUND
~~
To
pair a different device, press the BT button 0 a second time
to
enter pairing mode and pair your Bluetooth device as described
in
the
Bluetooth instructions.
Aux
input
Press the
OUX
button to select the Aux input. There
is
an
Aux input
on the rear of the unit that
allows any analogue device to be connected.
Speakerphone
G2 has a built
in
microphone and can be used to answer and make
phone
calls from your connected device.
If
you have
an
incoming call
the 'phone' button
~'
will flash and you can choose
to
answer with
G2 by pressing the button.
If
you make a call from a connected device,
G2
will automatically switch to speakerphone mode.
Sync
two
G2
It
is
possible to synchronise
two
G2 speakers together so that both will
play
back your music simultaneously. Using the mode switch on the
rear
of
G2, select 'A' on one and 'B' on the other and then double press
the BT button
0 on each G2.
TOP
TIPS
Auto
power
down
To
save power, your G2 will automatically turn off after 30
minutes
if
no music
is
playing. Press the power button to turn
the G2 back on.
Low
battery
warning
,I,.
A flashing red
LED
~~'
indicates that the battery
is
too low and
the G2
will enter a standby
mode
where no music can be played.
This
LED
will continue flashing for 1 0 minutes after which the
G2
will turn off.
USB
Charging
The G2 can be used to charge compatible mobile devices. If the
charging adaptor
is
not connected this will discharge the battery.
!
Battery
Safety
Your G2 contains a high performance battery and charging system that
is
designed to work
in
temperatures that
do
not exceed 50°C (122°F). Leaving this
product
in
an
automobile where temperatures may exceed this limit may result
in
permanent battery damage, fire or explosion. Do not leave your product
in
any
location where temperatures may exceed this limit. Please recharge the battery
every
two
months
to
maintain the battery
in
optimal condition.
Cambridge
Audio