Need help?Do you have a question about the CAMBRIDGE CP1 and is the answer not in the manual?
General| Output level | 300 mV |
|---|---|
| Amplifier class | - |
| Audio output channels | - channels |
| Peak power per channel | - W |
| Total Harmonic Distortion (THD) | 0.009 % |
| Product color | Black |
| Connectivity technology | Wired |
| Built-in display | No |
Weight and Dimensions| Depth | 133 mm |
|---|---|
| Width | 215 mm |
| Height | 46 mm |
| Weight | 800 g |
Key safety guidelines for operation, handling, and maintenance of the unit.
Explanations of safety symbols and compliance marks.
Connect a moving coil cartridge to these sockets for specific loading.
Connect the turntable's grounding lead for shielding and noise reduction.
Connect a moving magnet cartridge to these sockets for standard loading.
Select MM or MC based on your turntable's cartridge for optimal performance.
Adjust relative output levels between left and right channels for channel balance.
Engage to reduce low-frequency vinyl rumble and imperfections.
Connect to line-level inputs on your amplifier using phono cables.
Connect the power supply unit here; power indicator LED shows status.
Switches the unit between the on and off states.
Guidance for resolving issues where the unit does not power on.
Steps to take if no audio output is detected from the unit.
Troubleshooting steps for audio output issues on a single channel.
Diagnosing and resolving excessive noise or hum in the audio signal.
Adjusting for incorrect volume levels, often related to cartridge type settings.
To Next Page
