Need help?Do you have a question about the CAMBRIDGE CXA60 and is the answer not in the manual?
General| Frequency Response | 5Hz - 60kHz +/- 1dB |
|---|---|
| Weight | 8.3 kg (18.3 lbs) |
| Standby Power Consumption | <0.5W |
| DAC | Wolfson WM8740 |
| Digital Input Max Sample Rate | 24-bit/192kHz |
| Damping Factor | >100 |
| Power Output | 60 Watts per channel (8 Ohms) |
| Total Harmonic Distortion | <0.02% @ 20Hz - 20kHz, 80% of rated power |
| Inputs | 4 x RCA, 1 x USB |
| Outputs | 1 x RCA pre-out, 1x Headphone Jack |
| Dimensions | 115 x 430 x 341 mm (4.5 x 16.9 x 13.4 inches) |
| Power Consumption | 500W |
Switches the CXA between On and Standby mode.
Connecting a CD player via coaxial digital input and loudspeakers.
Connecting CXA80 to CXN Network player using XLR cables.
Connecting to a computer via USB for audio playback.
Essential safety precautions for using the apparatus.
Protects speakers from DC voltage faults.
Protects unit from overheating.
Protects output transistors from overload.
Protects unit during power-up from short circuits.
Steps to resolve power-related issues.
Steps to resolve issues with no audio output.
Steps to resolve issues with audio on only one channel.
Steps to resolve buzzing or humming noises.
Refers to CAP5 protection system indications.
Power output ratings into different impedances.
Total Harmonic Distortion measurements.
Range of audible frequencies the unit can reproduce.
Signal-to-noise ratio at 1W output.
Signal-to-noise ratio at full power output.
Signal level required for nominal output.
Resistance of the input terminals.
List of available input connections.
List of available output connections.
Measure of amplifier's control over speaker cone.
Specifications for USB audio input.
Details on USB audio compatibility and sample rates.
To Next Page
