Troubleshooting
There is no power
Ensure the power supply is connected securely to the unit.
Ensure the power supply is fully inserted into the mains socket and is
switched on.
There is no sound
Make sure the unit is plugged in.
Check that your turntable is properly connected.
Check that your speakers are properly connected.
Check all connections are secure and correct amplier input is selected.
Ensure correct cartridge type has been selected (MM or MC).
There is no sound on one channel
Check that your speakers are properly connected.
Check all connections are secure.
There is a loud buzz or hum
Check turntable or tone arm for ground and connection lead fault.
Ensure no connections are loose or defective.
Ensure that your turntable is not too close to the amplier.
Volume is too loud/quiet
Check cartridge type matches input type. If a MC cartridge is connected
through the MM inputs, volume will be very quiet (and vice versa). Note
that it is possible to obtain high level MC cartridges which are designed
for an MM input.
In the event that the above solutions do not remedy your problem, please
consult our frequently asked questions (FAQ) section on our website:
techsupport.cambridgeaudio.com
For all servicing, in or out of warranty, please contact your dealer.
To Next Page
Loading...
