Need help?Do you have a question about the CAMBRIDGE CXR120 and is the answer not in the manual?
General| Receiver type | - |
|---|---|
| Frequency range | 10 - 20000 Hz |
| Audio output channels | 7.1 channels |
| Signal-to-Noise Ratio (SNR) | 90 dB |
| Total Harmonic Distortion (THD) | 0.006 % |
| Dynamic power per channel (4 Ohm) | 155 W |
| Power output per channel (1KHz@6 Ohm) | 120 W |
| Power output per channel (1KHz@8 Ohm) | 100 W |
| Power output per channel (20-20KHz@8 Ohm) | 1000 W |
| HDMI in | 7 |
| AC (power) in | Yes |
| Audio (L/R) in | 3 |
| Remote (IR) input | 1 |
| Digital audio optical in | 2 |
| Product color | Black |
| Handheld remote control | No |
| Headphone connectivity | 6.3 mm |
| Audio formats supported | AAC, AAC HE, AAC+, AIFF, ALAC, FLAC, MP3, OGG, WAV, WMA |
| Power consumption (standby) | 0.5 W |
| Supported radio bands | AM, FM |
Weight and Dimensions| Depth | 420 mm |
|---|---|
| Width | 430 mm |
| Height | 165 mm |
| Weight | 13200 g |
Register your Cambridge Audio product for updates, news, and exclusive offers.
Alerts users to the presence of uninsulated dangerous voltage within the product enclosure.
Indicates the presence of important operating and maintenance instructions in relevant service literature.
EU symbol for separate collection of electrical and electronic equipment for reuse or recycling.
Product complies with EU Low Voltage, EMC, and Energy-related Products Directives.
Product meets Australian Communications Authority Radio communications and EMC requirements.
Product meets Russia, Byelorussia and Kazakhstan electronic safety approvals.
Caution that the top surface may become hot during continuous operation.
Notes regarding radio/TV interference and compliance with FCC rules.
Controls for powering the unit on/off and standby mode.
Buttons for selecting audio sources, tuning, and direct mode.
Controls for managing Zone 2 functions on compatible models.
Includes display status and menu navigation buttons.
Covers USB/MP3/HDMI/MHL inputs and volume control.
Ports for FM/AM aerials and analog audio inputs/outputs.
Ports for digital audio, HDMI inputs/outputs, and USB.
Terminals for speakers, Zone 2 outputs, and bi-amp connections.
Includes IR receiver, trigger, RS232C, and AC power socket.
Controls for power, source selection, and menu navigation.
Buttons for playback, mute, audio modes, and bass/treble.
Includes preset storage, trigger control, and Zone 2 management.
Choose your desired audio or video source using front panel or remote controls.
Choose an appropriate mode for the source material/type.
Lossless audio technology for high capacity Blu-ray discs.
Enhanced Dolby Digital encoding for improved quality and 7.1 channels.
Lossless audio codec extending DTS for bit-for-bit recreation of studio masters.
Extension to DTS for 7.1 discrete channels, using lossy compression for extra data.
Technology to encode 5 surround channels into a stereo mix for playback.
Recalculates 7 discrete surround channels from stereo or 5.1 material.
Adds height channels above front speakers for enhanced spatial cues.
Recreates 6 channel surround sound from analogue matrix encoded stereo source material.
Provides 5.1 channels of 96kHz/24bit audio for DVD-Video and DVD-Audio discs.
Choose between conventional stereo or stereo with subwoofer output.
Bypasses all audio processing, DSP, and tone controls for pure signal.
Maps stereo input to all speakers, sending mono to center and sub.
Guides through configuring speaker channels, size, and distance.
Configure individual speaker sizes (Small, Large, None).
Measure and enter the distance from the listening position to each speaker.
Adjust speaker volume levels for consistent sound output.
Set crossover frequencies for small speakers to direct bass to the subwoofer.
Choose between Feet or Metres for measurements.
Select and name input sources for the unit.
Assign HDMI video input for specific sources like StreamMagic.
Configure video upscaling (1080p to 4K) or passthrough.
Choose the type of audio input (Analogue, Digital, HDMI, Direct).
Option to bypass DSP and tone controls for analog sources.
Adjust the bass level for audio output.
Adjust the treble level for audio output.
Maintain consistent volume across content with Dolby volume features.
Adjust the Dolby volume leveler from 1-9 or off.
Trim differences in input levels between sources.
Select preferred stereo processing mode for the current source.
Select preferred multichannel processing mode for the current source.
Adjust audio delay for video synchronization.
Use remote, front panel, or app to control Zone 2 volume, source, and mute.
Enable or disable the Zone 2 function.
Select the video/audio source to be sent to Zone 2.
Set the desired maximum volume level when powering on Zone 2.
Configure audio output for Zone 2 via HDMI or line level.
Select 'Zone 2' in Speaker Setup > Back Amp Configuration.
Connect the CXR to your router using an Ethernet cable.
Configure a static IP address for advanced users.
Connect the CXR to your wireless network using the supplied antenna.
Retry network connection if it fails.
Choose the language for the on-screen display.
Set the timer for automatic power off when no activity is detected.
Enable ECO mode for lower standby power consumption.
Adjust the brightness of the front panel display.
Keep the network connection active for app control and updates.
Set AM tuning increments for different regions.
Set FM tuning increments for different regions.
Enable Audio Return Channel to send TV audio back to the CXR.
Turn on to enable CEC control features for connected devices.
Allow the TV to switch the CXR off into standby.
Allow the TV to switch the CXR on from standby.
Configure display of input, audio type, and volume settings on screen.
Allow an HDMI source to pass through to the TV when the CXR is in standby.
Electronically reposition speakers to match studio layout for DTS-HD tracks.
Select mute level: complete, -10dB, or -30dB below current.
Prevent analogue input from looping back to its output.
Control front IR receiver functionality.
Set the maximum volume level when powering the CXR on.
Adjust settings like Panorama, Centre Width, Dimension, Dolby DRC, and Height gain.
Limit the difference between loud and quiet passages.
Configure decoding of Dolby EX encoded tracks for surround speakers.
Set the gain for height speakers.
Access web interface for player customization and firmware upgrades.
Connect via Ethernet and find IP address for web access.
Connect wirelessly via Wi-Fi using the supplied antenna.
To Next Page
