28
Although this appliance functions safely and
automatically when operated in accordance with this
guide, we recommend that you do not leave this or
any appliance connected to electrical or water supply
and operating while unattended for any extended
period of time.
For extended vacations, disconnect power cord from
wall receptacle, remove food and clean interior with a
baking soda solution using 15 ml of soda per each litre
of water. Wipe dry. To prevent formation of odour,
place an open box of baking soda in refrigerator and
leave doors open. If you leave for shorter absences,
remove perishable foods and leave control dials at
normal setting. If, however, room temperature is
expected to go below 13° C (55°F), turn control dials
to OFF, remove food, clean interior, leave doors open
and remove plug from wall receptacle.
If your refrigerator is equipped with an icemaker, flip
manual switch to OFF position and shut off water
supply to icemaker. (Ask installer to point out
location of shut-off valve at time of installation).
Disconnect power cord from wall receptacle. Remove
all foods and clean interior. Such loose items as
grille, shelves, storage pans, ice bin, covers and
removable parts should be protected or secured with
tape. This prevents their coming loose and causing
damage. If your refrigerator is on wheels, be sure it is
properly secured in moving van to prevent rolling
and damage. Handle with care, exterior should be
protected with blanket covering.
Preparing for vacation?
Peparing to move?
To replace a burned-out bulb, unplug the refrigerator from its
electrical outlet, unscrew the bulb when cool and replace it with
an appliance bulb of the same or lower wattage.
Turning the control to the OFF position does not remove power to the light
circuit.
Light Bulb Replacement
Safety Information
Installation Instructions
Customer ServiceOperating InstructionsTroubleshooting Tips
To Next Page
Loading...
