12
Reversing the Door Swing
• Read the instructions all the way through before starting.
• Note: Stainless steel doors are not reversible.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid using them in
the wrong places.
• Provide a non-scratching work surface for the doors.
When Reversing the Door Swing:
Important
Once you begin, do not move cabinet until door-swing reversal
is completed.
These instructions are for changing the hinges from the right
side to the left side.
If you ever want to change the hinges back to the right side,
follow these same instructions (merely reverse all references to
left and right).
Tools Required
• Masking tape
• Phillips Screwdriver
• Square Head #2 Screwdriver
• Putty knife or thin-blade screwdriver
• 7/32", 5/16", 3/8" sockets and ratchet
(6-point sockets are recommended)
To Remove the Doors
❶
General
a. Unplug the refrigerator from its electrical outlet.
b. Empty all door shelves, including the dairy compartment.
CAUTION: Do not let either door drop to the floor. To do so
could damage the door stop.
Safety Information
Installation Instructions
Customer ServiceOperating InstructionsTroubleshooting Tips
To Next Page
Loading...