Camco OLYMPIAN Wave3 User Manual

1
Your Olympian
™
heater is designed and
built to provide years of comfortable,
radiant heat and economical LP Gas
consumption. In order to minimize
installation problems and maximize
your heating comfort, read all of these
instructions carefully and completely.
Olympian heaters produce mostly radiant
heat as a result of a flameless catalytic
combustion process. Its efficiency
is high because combustion takes
place at relatively low temperatures.
The wavelength of the radiant heat
produced by Olympian heaters is
particularly effective for creating
a feeling of warm comfort similar
to solar radiation. The sun is an
excellent example of radiant heat
transfer, because it transmits energy
through space, releasing heat when
its rays strike objects and people.
Like the sun, Olympian heaters radiate
heat directly to people, floors, walls
and other objects without heating the
air first, so warmth is felt immediately.
Radiant heat is absorbed by objects
and then emitted into the air to heat
the surrounding area. Therefore, your
Olympian heater should be oriented to
direct its heat rays toward the space
to be heated, much like a floodlight is
positioned to illuminate a desired area.
Avoid placing furniture or objects in a
place that will block the heat rays.
Your Olympian heater has undergone
rigorous safety, performance and
quality assurance testing before
leaving the factory. It is designed to
deliver years of trouble-free service.
The INSTALLER must leave this set
of instructions with the owner after
installation is completed. (IMPORTANT:
Installers must have the owner fill out
and mail the warranty card supplied
with each heater.) The OWNER should
read this entire manual to be assured
of a satisfactory installation and to
fully understand operating procedures.
Keep these instructions in a safe,
convenient place for future reference.
Installation and Operating Instructions
NOTICE
WARNING: CAREFULLY READ THE FOLLOWING INSTALLATION INFORMATION.
EFFECTIVE DATE: JANUARY 2009
Models:
This is a heating appliance. Any safety screen or guard removed for servicing must be replaced prior to operating the heater.
Any changes or alterations to this heater or its controls (or attempts to clean
the catalytic pad) can result in damage, defective operation, fire, explosion,
asphyxiation and/or burns.
If product components are missing or damaged do not return to dealer.
Contact the manufacturer at (336) 668-7661
Catalytic Safety Heater
CALIFORNIA PROPOSITION 65 WARNING:
Combustion by-products produced when using
this product contain chemicals known to the
State of California to cause cancer and/or birth
defects or other reproductive harm.
™

Camco OLYMPIAN Wave3 Specifications

General

Model	OLYMPIAN Wave3
Category	Portable Heater
Fuel Type	Propane
Heat Output	3000 BTU
Safety Features	Oxygen Depletion Sensor (ODS)
Type	Catalytic Heater

Summary

Important Safety Precautions

Safety Information for Use of LP Gas

Essential safety information and warnings related to the use of LP Gas, including odor detection and hazards.

LP Gas Warning Odor

Instructions on how to identify and react to a gas leak, emphasizing odor detection and immediate actions.

No Odor Detected - Odor Fade

Explains odor fade and sensitivity issues with LP gas detection, and actions to take if no odor is detected.

Some Points to Remember

Key reminders about recognizing LP gas odor, handling leaks safely, and periodic sniff tests.

Gas Supply

Critical information on gas supply requirements, pressure, safety components, and installation codes.

Installation Instructions

Fuel

Specifies the approved fuel type (HD-5 propane) and warnings against conversion to other fuel sources.

Locations

Guidelines for safe and effective placement of the heater, considering heat, traffic, and clearances.

Heater Connection

Instructions for safely connecting the heater to the gas supply, including leak detection.

Mounting Heater on Wall

Steps and considerations for mounting the heater securely on a wall, including vertical and horizontal options.

Recessed Horizontal or Vertical Installation

Procedures for recessing the heater into a wall, with model-specific notes and warnings.

Outdoor Portable use of Heater

Information on converting the heater for portable use with leg stands and standard LP gas cylinders.

Operating Instructions

Air Supply

Requirements for adequate room ventilation to ensure complete combustion and prevent carbon monoxide.

Lighting and Operating Instructions

Step-by-step guide for safely lighting, igniting, and operating the heater, including initial start-up.

Relighting

Procedure and conditions to follow for safely relighting the heater after it has gone out during operation.

Care of Heater

General

General warnings about alterations, potential hazards, and safe operation practices.

Cleaning

Instructions for cleaning the heater's exterior and precautions for the catalyst pad.

Off Season

Procedures for safely shutting off gas supply and storing the heater during off-season periods.

Service

Tips for maintenance, periodic inspection, and when to call a qualified service technician.

Piezo Electric Igniter

Troubleshooting for the ignition system and information on replacing igniter parts.

Thermocouple

Information on thermocouple function, troubleshooting, and replacement procedures.

Catalyst Pad "Poisoning"

Explains catalyst pad poisoning, its causes, symptoms, and remediation steps.

Use of improper gas

Details how improper gas types can damage the catalyst pad and cause operational issues.

Accessories for Your Olympian Heater

Leg Stands

Information on leg stands for making Olympian Wave heaters portable.

Recess Kits

Details on recess kits for flush mounting Wave 6 and Wave 8 heaters.

Custom Fitted Dust Covers

Options for custom-fitted dust covers to protect heaters when not in use.

Low Pressure Regulator and Hose

Description of low pressure regulator and hose kits for LP gas connection.

Elbow

Information on the 90° Elbow accessory for gas connection.

Olympian Guarantee

Details of the manufacturer's 36-month warranty, coverage, and exclusions.