CAMDEN CX-33 User Manual

Inside
Wall Switch
(always unlocks
& opens door)
FILENAME:
WC-13-7 wiring diagram.vsd
DRAWING No: DRG-CX-WC-13-7
WC-13 Washroom Package Wiring Diagram (normally unlocked)
SCALE: NONE DRAWN BY: DGW REVISED:DATE: 07/22/14
Magnetic
Contact
Switch
12 - 24 V
AC/DC
Power
Outside
Wall Switch
CM-45/4GRESE1
(or similar)
Inside
Push to Lock
CM-45/8GRESE1
(or similar)
Fail-Safe
Electric Strike
Shown
MOV
Wire MOV
(supplied)
directly to strike
(If Fail-Secure lock is
used, wire to
Terminals 1 & 2)
N.C.
The following items are required, but NOT included:
- Door Operator
- Electric Strike
- Inside Acvate wall switch
- 12 / 24V power supply
The following are part of the WC-13 package:
- CX-33 Relay
- CX-MDC Door Contacts
- CM-45/4GRESE1 Illuminated Push plate switch
PUSH TO OPEN, with signage
- CM45/8GRESE1 Illuminated Push plate switch
PUSH TO LOCK, with signage
Contacts closed
when Door
is closed
12 / 24 VDC
Power
For Strike
For Normally Locked Door, see over...
PUSH
TO
LOCK
12/24V
Power
Remote
N.O.
Relay
Output
LED 1
CX-33
LED 2
LED 3
DISPLAY
Relay 1 Relay 2 Relay 3
N/C
N/O
COM
N/C
N/O
COM
N/C
N/O
COM
POWER
12/24V
AC/DC
DRY 1 DRY 2 DRY 3 DRY 4
+ WET
INPUT INPUT INPUT
INPUT
- INPUT
MENU UP DOWN
0.0.7
Door
Operator
PUSH
TO
OPEN
PUSH
TO OPEN
12/24V
Power
Remote
N.O.
Relay
Output
Important:
Ensure wiring polarity is
consistent from Relay 3 to each
Aura´s Remote Input terminals.
NOTE: This Drawing should be
used in addion to each products
respecve Installaon Manual.
(not in place of)
+
-
Part # 40-82D003
Red
IDL
G/B
Red
ACT
G/B
4
3
LOC/REM
RELAY
2
1
Enable
SPEAKER
ON
1
2
3
4
Color Select
Aura
Dip Switch
Settings
ON
CAMDEN DOOR CONTROLS
5502 Timberlea Blvd.
Mississauga, Ontario
L4W 2T7

CAMDEN CX-33 Specifications

General

Brand	CAMDEN
Model	CX-33
Category	Other
Language	English

Summary

CX-33 Control Unit and Connections

CX-33 Input/Output Terminals

Details the purpose of DRY inputs, WET input, and Relay outputs on the CX-33 unit.

CX-33 Status Indicators

Describes the LED indicators and the display for system status monitoring.

Door Control Interfaces and Hardware

Illuminated Push Plate Switches

Wiring for CM-45/4GRESE1 (Push to Open) and CM45/8GRESE1 (Push to Lock) plates.

Inside Activate Wall Switch

Wiring for the inside wall switch that unlocks and opens the door.

Door Operator and Electric Strike Wiring

Connects the door operator and Fail-Safe electric strike, including MOV protection.

Magnetic Contact Switch

Wiring for the magnetic contact switch to detect door closure status.

Aura Dip Switch Settings

Color Select and Enable Settings

Configuration settings for Aura dip switches, including color select and enable functions.

WC-13 Washroom Package Wiring Diagram (Normally Locked)

CX-33 Control Unit Overview

Central unit CX-33 with display, LEDs, and terminal connections for the normally locked configuration.

Input Devices and Keypad/Reader

Wiring for push plates, inside wall switch, and external access control (keypad/reader).

Door Hardware and Strike Wiring

Connections for door operator and Fail-Secure electric strike, including MOV protection.

Door Status and Configuration

Wiring for magnetic contact switch and Aura dip switch settings for normal lock operation.