CAME FLUO-SL - Electrical Connections; Opening Sensor Connection; Photocell Connection

FA00150-EN v.7 - 06/2017
26
CAME S.p.A.
12.8 ELECTRICAL CONNECTION OF OPENING SENSOR 001MR8106, 001MR8107
Connect the sensor, using the supplied cable to the terminals of the electronic control as follows:
Terminals
001MR8106, 001MR8107 sensor
Notes
OPENING
0
Green
1
Brown
1
White
3A (3B)
Yellow
For more information, check the installation manual of the sensor.
12.9 ELECTRICAL CONNECTION OF PHOTOCELL 001FLA-17
Connect the photocell, using the cables supplied to the terminals of electronic control as follows:
Terminals
PE12CNT15 emitter (grey cable)
PE12CNT15PO receiver (black cable)
Notes
SAFETY
0
Blue (BU-)
Blue (BU-)
1
Brown (BN+)
Brown (BN+)
8A (8B)
-
Black (BK)
Remove the jumper.
Set the menu: ADV >
T41 > NO.