CAME FLUO-SL - Electronic Control Adjustment; Advanced Parameters Menu (Continued); Function Selector Menu

FA00150-EN v.7 - 06/2017
32
CAME S.p.A.
Display
Description
Factory settings
SL5E
EMERGENCY
DOOR
If necessary, you can turn off the operation as an emergency exit. Choose between the following
values:
NO = emergency exit disabled
YES = emergency exit enable
YES
PULY
MOTOR
PULLEY
Set the type of motor pulley. Choose between the following values:
15 = motor pulley with 15 teeth
18 = motor pulley with 18 teeth
18
13.4 FUNCTION SELECTOR MENU
Using the buttons ↑ and ↓ select SEL, press ENTER to select and adjust the following function selector menu.
Display
Description
Factory settings
MODE
SELECTOR
MODE
Displaying of operating mode of function selector device. Choose between the following values:
NO = no mode
OPEN = open door
AUTO = automatic bi-directional operation
CLOS = closed door
1D = automatic one-way operation
PA = automatic partial operation
1DPA = automatic one-way operation and partial
NO
SECL
SELECTOR
LOCK
How to activate the function selector. Choose between the following values:
NO = function selector always accessible
LOGO = function selector accessible by selecting the logo for 3 seconds
TAG = function selector accessible with badge and numeric code
NO
DLAY
DELAY
CLOSED
DOOR
Setting delay time function closed door. Choose between the minimum and maximum values:
minimum value = 1 s
maximum value = 5 min
1
TMEM
TAG
MEMORISE
Saving procedure of badge and numeric code for function selector. Choose between the following
values.
NO = no saving
SMOD = Saving badge and numeric code for activation of the function selector:
- press the ENTER button for 1 second, the display shows REDY,
- approach the badge to the function selector (in front of the NFC symbol), the display shows the
badge code,
- wait for 20 seconds or press the ESC button.
OPEN = Saving badge and numeric code for activation of priority opening: proceed as SMOD
Note: if the badge and the numeric code is not recognized the display shows the message UNKN, or if
the badge and the numeric code is already stored will show the message NOK.
You can store a total maximum of 50 badges and numeric codes.
NO
TDEL
TAG DELETE
Cancellation procedure of badge and numeric code. Choose between the following values.
NO = no cancellation
YES = badge and numeric code cancellation
- press the ENTER button for 1 second, the display shows REDY,
- approach the badge to the function selector (in front of the NFC symbol), the display shows the
badge code,
- wait for 20 seconds or press the ESC button.
Note: if the badge and the numeric code is not recognized the display shows the message UNKN.
NO