Need help?Do you have a question about the CAME RIOED8WS and is the answer not in the manual?
General| Brand | CAME |
|---|---|
| Model | RIOED8WS |
| Category | Wireless modules |
| Language | English |
Component 1: Buzzer for warning of low batteries or radio communication issues.
Component 2: CH1 and CH2 LEDs for status indication.
Component 3: T1 and T2 buttons for device programming.
Component 4: Terminals for connecting sensitive safety-edges.
Component 5: The base part of the device housing.
Component 6: The cover part of the device housing.
Component 7: Screw for securing the control card.
Component 8: Screw for securing the casing cover.
Component 10: The main electronic circuit board of the device.
Connecting DFWN-series edges to IN1/IN2 and cutting resistor.
Connecting DF-series edges to IN2/IN1 and adding 8.2 kΩ resistor.
Procedure for saving the wireless module to the control card.
Procedure for storing input signals via T1 or T2 buttons.
Procedure to reset the device by holding the T2 button.
Guidelines for replacing batteries with the same or equivalent type.
Device emits a buzzing sound every 10 seconds when batteries are low.
To Next Page
