The device is a Camec Compact RV II Top Loading Washing Machine, model WM35T, designed for household and similar applications, including staff laundry areas, farmhouses, hotels, motels, residential environments, bed and breakfast settings, and communal use in blocks of flats or launderettes. It is a fully automatic washing machine with a 3.5KG rated wash/spin capacity, making it suitable for smaller loads.
Important Technical Specifications:
- Type: Fully Automatic Washing Machine
- Rated Voltage and Frequency: 220 - 240V / 50Hz
- Rated Wash / Spin Capacity: 3.5KG
- Rated Power: 280W
- Water Pressure: 0.1MPa to 0.6MPa
- WELS Water Consumption: 44L per standard wash cycle
- Dimensions: 445 (W) x 460 (D) x 730 (H)mm
- Net Weight: 16KG
Usage Features:
The washing machine offers a range of wash programs and water level selections to accommodate different laundry needs.
- Control Panel: The control panel includes a Power button (ON/OFF), Select button (for wash program), Water Level button, and Start/Pause button. A status display shows the chosen program, remaining wash time, and error codes if a fault occurs.
- Wash Programs: Available programs include Standard, Soft, Quick, Baby Clothes, Wash, Spin, Drum Self Clean, and Air Dry. Each program has an approximate cycle time ranging from 10 minutes (Spin) to 60 minutes (Standard, Baby Clothes).
- Water Level Selection: The Water Level button allows selection from 1L to 4L, corresponding to different washing loads:
- 4L: 2.8 to 3.5KG
- 3L: 2.0 to 2.8KG
- 2L: 1.0 to 2.0KG
- 1L: < 1.0KG
A long press on the Water Level button enters the spin program.
- Wash Mode Selection: The Wash Mode button allows selection of preset programs. A long press for 3 seconds activates the reserve function.
- Start/Pause Function: The Start/Pause button initiates or pauses the washing cycle.
- Time Display: The display shows the remaining time to complete the washing cycle.
- Error Codes: The machine provides error codes to assist in troubleshooting:
- E1: Water fill operation more than 20mins (check inlet water pressure, clean filter).
- E2: Water drain operation more than 5mins (lower drain hose, check for foreign objects).
- E3: Top cover open during rinse cycle (close top cover).
- E4: During rinse cycle, tub got hit more than 3 times (adjust clothes).
- E6: Water level exceed limit or water level sensor faulty (control unit auto adjusts water level, or remove/replace sensor).
- E7: Top cover open during Child Lock mode (close top cover).
- Safety Features: The appliance is designed with safety in mind, including warnings against using faulty power cords, operating with wet hands, and obstructing ventilation holes. It is recommended to use a dedicated AS/NZS wall type 220V-240V AC power outlet with reliable grounding and a leakage protection device.
Installation Instructions:
- Levelling: Adjust the levelling legs on the front left and right sides to ensure the washing machine is stable.
- Bottom Cover: Install the bottom cover from front to rear and secure it with a screw.
- Inlet Water Pipe Joint: Remove the joint from the hose, install it to the tap, then connect the hose.
- Water Hose Connection: Screw the supplied water hose to the water inlet valve on the washing machine. Turn on the tap to check for leaks after installation.
Maintenance Features:
Regular maintenance is crucial for the appliance's longevity and efficient operation.
- External Cleaning: Wipe the external surface and the washing machine tub with a soft, clean cloth.
- Tub Drying: Open the top cover to dry and air the tub after every wash to prevent mold and odors.
- Filter Cleaning: Remove and clean the filter cover periodically.
- Draining Residual Water: If the machine will not be used for a prolonged period, drain any residual water.
- Pre-Maintenance Safety: Always remove the power plug from the AC wall power outlet and turn off the water tap before performing any maintenance or cleaning.
General Safety Instructions:
- Read the manual carefully before installation and use.
- Ensure proper installation, maintenance, and operation.
- Do not install in humid places, where it cannot drain normally, or near direct sunlight/heating sources.
- Use new hose sets for water connection; do not reuse old ones.
- Do not obstruct bottom ventilation holes.
- Do not spray water on the appliance.
- Do not disassemble, repair, or modify the appliance.
- Use cold water only (not above 50 degrees Celsius).
- Avoid washing waterproof clothing to prevent abnormal vibration.
- Do not wash clothes dyed with volatile substances.
- Do not place hot or heavy items on the appliance.
- Do not put hands into the appliance during operation.
- Supervise young children to ensure they do not play with the appliance.
- The appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by a responsible person.
- In environments with temperatures of 0 degrees Celsius or below, move the appliance to a room temperature environment for 2 to 4 hours before use to prevent damage to the water inlet and drainage system.
This product comes with a 12-month warranty. For support or enquiries, customers can contact Camec's National Customer Support Team in Australia (1300 422 632) or New Zealand (09 257 2419), or visit their respective websites. Retail and trade enquiries can be directed to Camec sales offices in Victoria, New South Wales, Western Australia, New Zealand, and Queensland.
Need help?
To Next Page
General
