Camec 051879 - Troubleshooting Instructions

7 | P a g e
Version 1.0
NOTE: Before carrying out any maintenance and/or cleaning, always remove the
power plug from the AC wall power outlet and turn off the water tap.
Observation / Fault Recommended Solution
Unable to operate

Check power
supply
 Check power plug is connected
properly
 Check water tap is turned on
 Check if time delay setting is ON
 Check if the top cover is closed
properly
 Check if drain hose is installed
properly
Selected program unable to start

Check if Child Lock or
Time Delay
setting is ON

Restart the washing machine
Water tap leakage

Check if the inlet water pipe joint
size fits the tap
 Check inlet water pipe joint and
water hose are
tightened
properly
Water drains when filling

Check if there are any
foreign
objects causing obstruction at the
drain valve
Abnormal noise

Check if washing machine
installation is stable
 Check if there are any foreign
objects in the tub
 Check if the filter cover is not
installed properly
Clothes are not washed properly

Check washing load is not above the
washing capacity
 Check washing detergent and water
level is enough for washing load
Clothes are not rinsed dry

Clothes are not put properly
in the
tub for rinse. Washing machine will
auto adjust and start rinse again. If
fail after 2 repeat cycles, alarm will
sound,
and rinse operation will stop
Top cover is open during rinse
operation

Do not open top cover during rinse
cycle. Alarm will sound and error
code E3 display
Troubleshooting Instructions
More information https://www.caravansplus.com.au