OPERATING INSTRUCTIONS:
PROGRAM MODE FUNCTION
P01 STATIC COLOUR
Blackout
7 colours
Flash interval adjustable
P02 DREAM
7 colour dreaming mode
Speed & Flash interval adjustable
P03 METEOR
7 colour flowing mode
Speed & Flash interval adjustable
P04 FADE
7 clour fading mode
Speed & Flash interval adjustable
P05 CHANGE
7 colour changing mode
Speed & Flash interval adjustable
P06 FLOW 1
7 colour chasing in 1 way
Speed & Flash interval adjustable
P07 FLOW 2
7 colour chasing in 2 ways
Speed & Flash interval adjustable
P08 FLOW 3
7 colour chasing in 1 relay way
Speed & Flash interval adjustable
P09 FLOW 4
7 colour chasing in 2 relay ways
Speed & Flash interval adjustable
BUILT-IN PROGRAMS
You can choose between 14 built-in programs (01-14). In program STATIC, FLOW 8 and FLOW 9 ( 01, 13, 14 ) you
can select blackout (COL:BLA) as well as all 7 colours ( Red, Yellow, Green, Cyan, Blue, Purple, White).
The flash interval is adjustable from 0-99 (Flash00-99).
In Program 2-14 (02-14) you can adjust the speed (Speed00-99) of each mode as well as the flash interval of all 7 colours.
To select different modes (Program Mode 01 - 14, AUTO RUN, DMX MODE, SLAVE MODE, SOUND MODE) press
MODE button (repeatedly if necessary).
To select a program choose Program Mode and press ENTER once (program number blinks).
Select the desired program by using the UP an DOWN buttons. Press ENTER to change Colour and Flash interval
repeatedly if necessary (last digit blinks in each case) using Program 01.
Change value by using UP and DOWN buttons.
Press ENTER to change Speed and Flash interval repeatedly if necessary (last digit blinks in each case) using
Program 02 - 12. Change value by using UP and DOWN buttons.
Press ENTER to change Speed, Flash interval, Colour 1 (C1) and Colour 2 (C2) repeatedly if necessary (last digit
blinks in each case) using Program 13 and 14. Change value by using UP and DOWN buttons.
8
To Next Page
Loading...
