Need help?Do you have a question about the Cameo EVOS S3 and is the answer not in the manual?
Important safety instructions to follow during installation and operation.
Specific precautions for connecting the device to the mains power.
Brief introduction to the EVOS S3 moving head spotlight.
Highlights the main technical capabilities and components of the spotlight.
Details power, DMX, and network connection ports.
Explains the OLED display and control buttons for navigation.
Describes the pan and tilt locks used during transport.
Information on the startup process and the main display content.
Instructions for pairing W-DMX devices and setting operating modes.
Step-by-step guide to setting the DMX start address.
How to choose between 22-channel and 32-channel DMX modes.
Guides configuration for Auto Program and Static standalone modes.
Adjusting parameters like Pan, Tilt, Dimmer, and Colour directly.
Setting the device to operate as a slave in master/slave setups.
Accessing and modifying various system settings.
Configuring wireless DMX and display parameters.
Adjusting dimmer curves, movement reversals, fan speed, and LED frequency.
Performing tests, auto-lock, and various reset operations.
Navigating to the network configuration menu.
Setting up network mode, IP, subnet, and DMX universes.
Viewing device firmware and component version details.
Information on temperature, operating hours, and LED status.
Lists common errors and their suggested solutions or troubleshooting steps.
Instructions for positioning the spotlight and securing it.
Critical safety notes and experience requirements for overhead installation.
Explanation of DMX-512, its data transmission, and device limits.
Details on serial connections, cables, pin assignments, and terminators.
Covers lamp, colour mixing, beam angle, DMX modes, power, and efficiency.
Details dimensions, weight, housing, operating temperature, and humidity.
Information on product warranty, service, and correct disposal.
FCC and CE compliance statements and relevant directives.
Controls for Pan, Tilt, Dimmer, and Strobe functions in 22-channel mode.
Details CMY+CTO mixing and Colour Wheel operations in 22-channel mode.
Operations for Gobo Wheel 1, Gobo 1 Rotation, Index, and Gobo Wheel 2.
Controls for adjusting the beam's zoom and focus.
Controls for iris, prism rotation/position, and frost effects.
Configuration of device settings like fan, pan/tilt invert, and resets.
Pan, Tilt, Dimmer, and Dimmer Fine controls in 32-channel mode.
Strobe functions, CMY and CTO colour mixing in 32-channel mode.
Iris, prism, frost effects, and auto program selections.
Pan/Tilt macros, speed settings, and dimmer curve selections.
Important safety instructions to follow during installation and operation.
Specific precautions for connecting the device to the mains power.
Brief introduction to the EVOS S3 moving head spotlight.
Highlights the main technical capabilities and components of the spotlight.
Details power, DMX, and network connection ports.
Explains the OLED display and control buttons for navigation.
Describes the pan and tilt locks used during transport.
Information on the startup process and the main display content.
Instructions for pairing W-DMX devices and setting operating modes.
Step-by-step guide to setting the DMX start address.
How to choose between 22-channel and 32-channel DMX modes.
Guides configuration for Auto Program and Static standalone modes.
Adjusting parameters like Pan, Tilt, Dimmer, and Colour directly.
Setting the device to operate as a slave in master/slave setups.
Accessing and modifying various system settings.
Configuring wireless DMX and display parameters.
Adjusting dimmer curves, movement reversals, fan speed, and LED frequency.
Performing tests, auto-lock, and various reset operations.
Navigating to the network configuration menu.
Setting up network mode, IP, subnet, and DMX universes.
Viewing device firmware and component version details.
Information on temperature, operating hours, and LED status.
Lists common errors and their suggested solutions or troubleshooting steps.
Instructions for positioning the spotlight and securing it.
Critical safety notes and experience requirements for overhead installation.
Explanation of DMX-512, its data transmission, and device limits.
Details on serial connections, cables, pin assignments, and terminators.
Covers lamp, colour mixing, beam angle, DMX modes, power, and efficiency.
Details dimensions, weight, housing, operating temperature, and humidity.
Information on product warranty, service, and correct disposal.
FCC and CE compliance statements and relevant directives.
Controls for Pan, Tilt, Dimmer, and Strobe functions in 22-channel mode.
Details CMY+CTO mixing and Colour Wheel operations in 22-channel mode.
Operations for Gobo Wheel 1, Gobo 1 Rotation, Index, and Gobo Wheel 2.
Controls for adjusting the beam's zoom and focus.
Controls for iris, prism rotation/position, and frost effects.
Configuration of device settings like fan, pan/tilt invert, and resets.
Pan, Tilt, Dimmer, and Dimmer Fine controls in 32-channel mode.
Strobe functions, CMY and CTO colour mixing in 32-channel mode.
Iris, prism, frost effects, and auto program selections.
Pan/Tilt macros, speed settings, and dimmer curve selections.
General| Color Temperature | 6500 K |
|---|---|
| IP Rating | IP65 |
| Housing Material | Aluminum |
| Housing Colour | Black |
| Operating Voltage | 100-240 V AC, 50/60 Hz |
| DMX Channels | 8 |
| LED Type | SMD |
| Refresh Rate | 3600 Hz |
To Next Page
