Need help?Do you have a question about the Cameo PAR 64 CAN and is the answer not in the manual?
Details the control features of the PAR 64 CAN, including DMX channels and colour control.
Lists key features like LED type, sound control, multi-colour changes, and power consumption.
Explains how the Cameo LED CAN operates in Stand-alone, Master/Slave, Sound activated, and DMX modes.
Selects a static colour. Use UP/DOWN to choose from 7 colours or blackout.
Selects colour jumping. Use UP/DOWN to adjust speed from J01 to J99.
Selects colour fading. Use UP/DOWN to adjust speed from F01 to F99.
Automatically switches between Colour Jumping and Fading modes. Speed is pre-adjustable.
Unit follows music beat via internal microphone. Use UP/DOWN to adjust sensitivity S00-S31.
Enters Slave Mode. Link units via DMX cables; slave unit follows master.
Selects 4-channel DMX mode. Use UP/DOWN to set DMX address (001-512). Red dot indicates mode.
Selects 6-channel DMX mode. Use UP/DOWN to set DMX address (001-512). No red dot indicates mode.
Follow figures for cable making. Do not connect shield to ground lug or casing to avoid shorts.
Use a terminator on the last unit for longer runs to avoid erratic behaviour. Resistance 120 Ohm.
Details warranty terms, duration (2 or 5 years), and exclusions for Adam Hall branded products.
Details the control features of the PAR 64 CAN, including DMX channels and colour control.
Lists key features like LED type, sound control, multi-colour changes, and power consumption.
Explains how the Cameo LED CAN operates in Stand-alone, Master/Slave, Sound activated, and DMX modes.
Selects a static colour. Use UP/DOWN to choose from 7 colours or blackout.
Selects colour jumping. Use UP/DOWN to adjust speed from J01 to J99.
Selects colour fading. Use UP/DOWN to adjust speed from F01 to F99.
Automatically switches between Colour Jumping and Fading modes. Speed is pre-adjustable.
Unit follows music beat via internal microphone. Use UP/DOWN to adjust sensitivity S00-S31.
Enters Slave Mode. Link units via DMX cables; slave unit follows master.
Selects 4-channel DMX mode. Use UP/DOWN to set DMX address (001-512). Red dot indicates mode.
Selects 6-channel DMX mode. Use UP/DOWN to set DMX address (001-512). No red dot indicates mode.
Follow figures for cable making. Do not connect shield to ground lug or casing to avoid shorts.
Use a terminator on the last unit for longer runs to avoid erratic behaviour. Resistance 120 Ohm.
Details warranty terms, duration (2 or 5 years), and exclusions for Adam Hall branded products.
General| Brand | Cameo |
|---|---|
| Model | PAR 64 CAN |
| Category | Lighting Equipment |
| Language | English |
To Next Page
