Cammy CI-320 User Manual

Connect the camera's antenna to the device for optimal signal reception.

Connect the camera's power adapter to a suitable power outlet.

Plug the network cable into the camera and then into your router.

Connect via a network port if direct router connection is not feasible.

Observe three lights on the back of the camera indicating successful setup.

Download the Cammy mobile application from the App Store or Google Play.

Sign up with your email and password to create a new Cammy account.

Tap the 'add a camera' button in the app to initiate the pairing process.

Choose 'Cammy camera' from the list to set up your specific device.

Tap 'skip' on the top right corner of the setup screen to proceed.

Select your camera from the list, often identified by MAC address or name.

Assign a unique name and a secure password to your camera.

Enter your Wi-Fi network name and password to connect the camera wirelessly.

Wait for the camera setup process to complete and finalize the connection.

Access the 'view my cameras' section to see your connected devices.

Proceed to set up the Home Alarm feature after camera configuration.

Solutions for when the network connector on the camera shows no lights.

Steps to resolve issues if the camera is not found in the Cammy application.

Troubleshooting tips for when no video feed is displayed in the Cammy app.