C150/0415 Page 9
Risk Assessment
HAZARDS RISK LEVEL ACTION NEEDED
General The machine should only be used by trained
operators.
Flying chippings Medium Wear protective clothing including helment, eye
and ear protection, loose tting gloves, and
overalls.
Ensure there are no bystanders in the area of
operation.
Machine moving whilst in
operation
Low Always ensure the machine is on rm, level
ground.
Shredder mill clogging Low Never overfeed the shredder. Allow the shredder
mill to clear before introducing more material.
Clearing blocked grille High The machine must be switched off and the spark
plug removed before attempting to clear any
blockage. Never reach inside with your hand, use
a piece of wood to clear any blockages.
Burns, lacerations and
other injuries by moving
parts and branches
High Only allow trained operators to use the machine.
Turn off the machine and remove the spark plug
before carrying out any maintenance.
Never reach down into the in-feed chutes or up
into the discharge grille.
Be careful of the hot exhaust.
Fire or irritant from fuel High Use correct fuel containers.
Follow regulations regarding transportation of
fuel.
Do not spill fuel onto the outside of the machine.
Do not smoke while refuelling.
Turn off the fuel tap before transporting the
machine.
To Next Page
Loading...