Camon C2000 - Maintenance; Maintenance Schedule; Basic Maintenance Checks; Engine Oil Level Check

CAMON C2000 Tiller Tracmaster Ltd
_______________________________________________________________________________
10 For parts diagrams visit www.tracmaster.co.uk
6.0 Maintenance
6.1 Schedule
Operation
Daily
Every
Week
Every
Month
Engine
Check engine oil level 10W/30
See separate engine manual
X
X
Machine
Check condition of tines
X
Check belt condition
X
Check operating lever and cable
X
Check protection cover condition
X
Check bearings
X
Lubricate wheel bearings
X
Tighten all nuts and bolts
X
6.2 Basic Maintenance
Check that all guards are fitted securely.
Ensure the cable connecting the drive lever to the engine is securely fastened at both ends
and shows no sign of wear.
Ensure the wheel is held securely.
6.3 Engine
6.3.1 Check Engine Oil Level
This is to be checked prior to each use and every 8 hours during operation.
Check only when the engine is off and in a horizontal position.
Clean the oil filler plug and its surrounding parts.
Remove the oil filler plug. Clean the dipstick with a clean cloth and put the oil filler
plug all the way back into the engine. Remove the oil filler plug and check the oil
level.
Re fill the oil if indicator shows more is required. For the Honda GX160 the
recommended oil is SAE 10w/30.
6.3.2 Change Engine Oil
Refer to the engine manufacturer's manual for location of components and more
detailed assistance.
Do not change the oil if the engine is hot.
The first oil change is after 50 hours of work.