1 - EPS V2 POWER UNIT (SOLUTION 5)
Depending on which elastic support you have you can secure the V2 power unit to the following seat bracket tubes:
1.1 - POSITIONING INSIDE THE SEAT TUBE WITH ELASTIC SUPPORT IN THE SEAT BRACKET TUBE
ROUND TUBE ELASTIC SUPPORT COLOUR
EXTERNAL DIAMETER 27.9 mm GREY
EXTERNAL DIAMETER 30.9/31.6 mm BLACK
In case of an aerodynamic seat bracket tube (teardrop), select the most suitable elastic support version for the geometry and
dimensions of the tube so that the support is stably inserted.
ASSEMBLY
EPS
1
Rev. 01 /10-2016
1
WARNING!
This technical manual is intended for use by professional mechanics.
Anyone who is not a qualified professional for bicycle assembly must not attempt to install and operate on the
components independently due to the risk of carrying out incorrect operations which could cause the components to malfunction, resulting in accidents,
physical injury or even death.
To Next Page
Need help?
General