Need help?Do you have a question about the CAMPAGNOLO SUPER RECORD 12 and is the answer not in the manual?
General| Speed | 12-speed |
|---|---|
| Bottom Bracket | Ultra-Torque |
| Group | Super Record |
| Material | Carbon, Titanium |
| Brakes | Dual pivot |
| Cassette | Super Record |
| Shifters | Ergopower |
| Rear Derailleur | Super Record 12 |
| Front Derailleur | Super Record 12 |
| Chainring Options | 50/34, 52/36, 53/39 |
| Crankset | Super Record 12x2 Speed |
Tasks require specialized knowledge, tools, and experience; consult a qualified shop if unsure.
An accident may cause severe personal injury or death to users or bystanders.
Product is for road racing style bicycles on smooth road or track surfaces only.
Lifespan depends on factors like rider size and conditions; regular inspection by a qualified mechanic is crucial.
Follow manual procedures, avoid modifications, replace damaged parts, wear visible clothing, use lights at night.
Ensure brakes, pedals, handlebars, frame, seat, wheels, and fasteners are in good condition and properly adjusted.
Reduced stopping power and tire adherence in wet conditions require extra care to avoid accidents.
Always wear protective gear; incorrectly assembled chains can cause accidents, injury, or death.
Determine correct chain length by positioning it on largest sprocket and chainring, adding specific links.
Measure chain slack (H) between rocker and chain, ensuring it's between 3mm and 22mm for proper function.
Specific chain lengths and links to remove based on frame chainstay length and chainring/cassette combinations.
Use a specific tool to push out the pin from the link, ensuring the chain ends with an internal link.
Use a new C-Link™ for closing; lubricate pins, fit into holes, and press with calipers until a click is heard.
Use a specific tool to insert into inner links adjacent to C-Link™, compress to bring pins closer, and remove.
C-Links are damaged during disassembly and must not be reused; always use a new C-Link for reassembly.
Frequent cleaning and lubrication are vital, especially after heavy use or in adverse conditions.
Use environmentally-friendly products; lubricate each roller individually; avoid spray oils near brake pads.
Using non-Campagnolo sprockets or chainrings can damage the chain and lead to accidents or injury.
Avoid high-pressure water washing; rinse, clean, dry, and re-lubricate parts in salt water environments.
Measure chain length using a precision caliper gauge; replace if any measurement exceeds 132.60 mm.
Failure to replace a worn chain can result in unexpected failure while riding, causing accidents or injury.
To Next Page