CAMPARK BM30 - Troubleshooting Common Issues

TROUBLESHOOTING
A:Lowerthevolumeorputthemonitorawayfromthecamera.
Thisphenomenoniscausedbytheacousticfeedback.Theaudiosignal
pickedupbythemicrophoneispickedupbythemicrophoneafterthe
receivedhornsounds.Itissuperimposedwiththesoundatthecamera
andthentransmitted.Thereceivingendwillemitaloudersoundthan
before.Thus,theself-excitedoscillationisformedandthewhistling
soundisgenerated.
Q:Whenthecameraisneartothereceiver,thereisahowling.
A:1.ChecktheMonitorChannelsettings,makesurethemonitorison
therightchannel.
2.Checkthepowersupplyonthecamera,makesuretheyare
properlyconnected
3.Makesurethecameraandthemonitorisinrange，whenused
indoors,therangewillbeaffectedbythewirelessinterferenceand
wallsinbetween.
4.Trytopairthecameraandthemonitoragain.
Q:Nopicturesfromthecamera.
Q：Theimageandvoicetransmissionisnotsmooth.Thevideoor
audiojams.
A:Thewirelesstransmissioncanbeaffectedbyobstructionslikewalls/
doors/glasses/trees,alsootherhighpowerdeviceslikemicrowave
ovenorwirelessrouterhavecertaininfluenceonthetransmission.
EN
14