To Next PageTo Next Page
Need help?Do you have a question about the Campbell Hausfeld PL150296 and is the answer not in the manual?
General| Max Pressure | 150 PSI |
|---|---|
| Tank Capacity | 6 Gallons |
| Power Source | Electric |
| Horsepower | 1.5 HP |
| Type | Portable Air Compressor |
275 ft. lbs. torque for fast removal of lug nuts and bolts. Features forward/reverse switch and ergonomic design.
250 ft. lbs. ultimate torque with built-in power regulator. Features push button forward/reverse valve.
130 ft. lbs. ultimate torque, 1,200 impacts per minute. Balanced, compact, ergonomic design.
18 ft. lbs. torque for small fasteners, engine repair. Ball socket retainer for easy replacement.
50 ft. lbs. torque for removing and installing nuts and bolts. Ball socket retainer for fast replacement.
25 ft. lbs. torque for nuts and bolts. Smaller size for tight areas. Ball socket retainer.
55 ft. lbs. torque for engine repair, tune-ups. Heat treated components, Santoprene® grip.
90 ft. lbs. torque for large fasteners, engines, tractors. Extra long handle for leverage.
25,000 RPMs for grinding, porting, smoothing. Lightweight composite housing.
22,000 RPMs, 1/2 HP motor. For heavy-duty grinding. Composite housing reduces fatigue.
25,000 RPMs for high speed grinding in medium duty work. Compact size for confined areas.
25,000 RPMs for high speed grinding in medium duty work. Compact size for confined areas.
18,000 RPMs, pistol design for gasket removal. Extended trigger for comfort.
18,000 RPMs for general grinding in confined areas. Santoprene® grip for comfort.
11,000 RPMs for fast material removal, cleaning, deburring. Side handle for better handling.
20,000 RPMs to cut steel, fiberglass, tubing. Swivel safety guard, trigger safety-lock.
23,000 RPMs to cut steel, fiberglass, tubing. 3/4 HP motor, Santoprene® grip.
3,800 strokes/min to cut up to 16 gauge steel. Designed for intricate patterns without burrs.
10,000 strokes/min to cut up to 16 gauge steel. For plastic, aluminum, fiberglass, sheet metal.
5 mm punch diameter, 1/2” flange depth. Prepares sheet metal for riveting, brazing, welding.
2,500 strokes/min for clean cuts into 18 gauge steel. For metal, aluminum, rubber, plastic.
1 5/8" stroke for cutting, chipping, scraping. Ergonomic design, includes 2 chisel bits.
2 5/8" stroke for panel cutting. Santoprene® grip for comfort. Built-in power regulator.
3 1/2" stroke for bolt cutting. For heavy-duty automotive work. Quick connect chisel retainer.
2,400 RPMs to drill, hone, saw, wire brush. Patented ergonomic design, extended trigger.
2,300 RPMs to drill, hone, ream metal, wood, concrete. Compact and maneuverable.
Drill, hone, saw, wire brush metal/wood. Durable Jacobs® chuck, Santoprene® grip.
Drill, hone, saw, wire brush metal/wood. Keyless chuck for fast bit changes, Santoprene® grip.
Drill, hone, ream, hole saw, wire brush. Angle head for use in confined areas.
Drill, hone, saw, wire brush metal/wood. Keyless chuck, Santoprene® grip.
10,000 RPMs for sanding wood, metal, fiberglass. Best for blending and smoothing filler.
10,000 RPMs for swirl-free finishes on wood, metal, fiberglass. Ergonomic design.
4,500 SPMs designed to smooth welds, remove rust and body filler.
18,000 RPMs for material removal, weld smoothing. Lightweight composite housing, ergonomic design.
10,000 RPMs for sanding wood, body filler, fiberglass, metal. Swirl-free, efficient fine finish.
10,000 RPMs for fine finish sanding with dust collection. For wood, body filler, fiberglass.
8,000 SPMs for sanding wood, metal, fiberglass, autobody fillers. Palm trigger.
Includes 3/8" ratchet, 1/2" impact wrench, sockets, extension, plugs, oil, case.
Includes 1/2" impact wrench, air hammer, sockets, extension, chisel bits, blowgun, plugs, oil, case.
Includes ratchet, impact wrench, spray gun, sockets, blowgun, chuck, hose, plugs, oil, case.
Includes ratchet, die grinder, sockets, grinding stones, plugs, wrenches, oil, case.
Includes impact wrench, ratchet, air hammer, sockets, bits, adapters, plugs, blowgun, chuck, oil, case.
Includes impact wrench, ratchet, air hammer, sockets, bits, adapters, blowgun, chuck, oil, case.
Draws abrasives for removing rust, scale, paint. Includes gun, hose, pick-up tube.
30 lbs abrasive capacity for ~50 min blasting. Removes rust, scale, paint. Includes gun, hose, hopper.
60 lbs abrasive capacity for ~100 min blasting. Removes rust, scale, paint. Includes gun, hose, hopper.
120 lbs abrasive capacity for ~200 min blasting. Wheels provide mobility. Includes gun, hose, hopper.
