Campbell Hausfeld SB504000 User Manual

28 Sp
Manual de Instrucciones
Garantía Limitada
1. DURACIÓN: Desde la fecha de compra por parte del comprador original, según se detalla: Campbell Hausfeld
(Trabajo estándar y sin especificar) – 1 (un) año, (Trabajo pesado) – 2 (dos) años, (Trabajo extremo) – 3 (tres) años;
IronForce de Campbell Hausfeld – 1 (un) año; Farmhand – 3 (tres) años; Maxus – 5 (cinco) años.
2. QUIEN OTORGA ESTA GARANTIA (EL GARANTE: Campbell Hausfeld / The Scott Fetzer Company 100 Production Drive,
Harrison, Ohio 45030 Teléfono: (800) 543-6400
3. QUIEN RECIBE ESTA GARANTIA (EL COMPRADOR): El comprador original (que no sea un revendedor) del producto
Campbell Hausfeld.
4. PRODUCTOS CUBIERTOS POR ESTA GARANTIA: Cualquier clavadora, grapadora, herramienta neumática, pistola
pulverizadora, inflador o accesorio neumático suministrado o fabricado por el Garante.
5. COBERTURA DE LA GARANTIA: Los defectos substanciales de material y fabricación que ocurran dentro del período
de validez de la garantía.
6. LO QUE NO ESTA CUBIERTO POR ESTA GARANTIA:
A. Las garantías implícitas, incluyendo aquellas de comercialidad E IDONEIDAD PARA FINES PARTICULARES,
ESTAN LIMITADOS A LO ESPECIFICADO EN EL PARRAFO DE DURACION. Si este producto es empleado para uso
comercial, industrial o para renta, la garantía será aplicable por noventa (90) días a partir de la fecha de compra.
En algunos estados no se permiten limitaciones a la duración de las garantías implícitas, por lo tanto, en tales casos
esta limitación no es aplicable.
B. CUALQUIER PERDIDA DAÑO INCIDENTAL, INDIRECTO O CONSECUENTE QUE PUEDA RESULTAR DE UN DEFECTO,
FALLA O MALFUNCIONAMIENTO DEL PRODUCTO CAMPBELL HAUSFELD. En algunos estados no se permite la
exclusión o limitación de daños incidentales o consecuentes, por lo tanto, en tales casos esta limitación o exclusión
no es aplicable
C. Cualquier falla que resulte de un accidente, abuso, negligencia o incumplimiento de las instrucciones de
funcionamiento y uso indicadas en el (los) manual(es) que se adjunta(n) al producto. Dichos accidentes, abusos por
parte del comprador, o falta de operar el producto siguiendo las instrucciones del manual de instrucciones
suministrado también debe incluir la desconexión o modificación de los instrumentos de seguridad. Si dichos
instrumentos de seguridad son desconectados, la garantía quedaría cancelada.
D. Los ajustes normales explicados en el(los) manual(es) suministrado(s) con el producto.
E. Artículos o servicios normalmente requeridos para el mantenimiento del producto, tales como: anillos en O,
resortes, amortiguadores, defensas, hojas de impulsor, fusibles, baterías
, empaques, almohadillas o sellos, boquillas
de fluído, agujas, boquillas para rociar arena, lubricantes
, mangueras de material, elementos filtrantes, álabes de
motores, abrasivos, hojillas, discos para cortar, cinceles, retenes para cinceles, cortadores, collarines, mandriles,
mordazas para remachadoras, brocas para desarmadores, almohadillas para lijar
, soportes de almohadillas,
mecanismo de impacto
o cualquier otro artículo desgastable que no se haya enumerado específicamente.
Estos artículos sólo estarán cubiertos bajo esta garantía por noventa (90) días a partir de la fecha de compra
original. Los artículos subrayados sólo están garantizados por defectos de material o fabricación
.
F. Defectos estéticos que no interfieran con la función del producto
7. RESPONSABILIDADES DEL GARANTE BAJO ESTA GARANTIA: Reparar o reemplazar, como lo decida el Garante, los
productos o componentes que estén defectuosos, se hayan dañado o hayan dejado de funcionar adecuadamente,
durante el período de validez de la garantía
8. RESPONSABILIDADES DEL COMPRADOR BAJO ESTA GARANTIA:
A. Suministrar prueba fechada de compra y la historia de mantenimiento del producto.
B. Llame a Campbell Hausfeld (800-424-8936) por sus opciones de servicio incluidas en la garantía. Los costos de flete
correrán por cuenta del comprador.
C. Seguir las instrucciones sobre operación y mantenimiento del producto, tal como se indica(n) en el (los) manual(es)
del propietario
9. CUANDO EFECTUARA EL GARANTE LA REPARACION O REEMPLAZO CUBIERTO BAJO ESTA GARANTIA: La reparación
o reemplazo dependerá del flujo normal de trabajo del centro de servicio y de la disponibilidad de repuestos.
Esta garantía limitada es válida sólo en los EE.UU., Canadá y México y otorga derechos legales específicos. Usted también
puede tener otros derechos que varían de un Estado a otro. o de un país a otro.
This manual contains safety,
operational and maintenance
information. Contact your Campbell
Hausfeld representative if you have
any questions.
Table of Contents
General Safety . . . . . . . . . . . . 1-3
Specifications . . . . . . . . . . . . . . . 2
Operating The Tool . . . . . . . . 4-7
Troubleshooting . . . . . . . . . . . . 7
Warranty . . . . . . . . . . . . . . . . . . 8
Description
This tool is designed for decorative
trim, molding, window casings,
furniture trim, picture frame assembly,
cabinetry, casebacks, and crafts.
Features include: convenient top
loading magazine which holds up to
100 brads or staples, adjustable depth
control, adjustable exhaust nose.
General Safety
Information
This manual contains information that
is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe
the following symbols.
Danger
indicates
an imminently hazardous situation
which, if not avoided, will result in
death or serious injury.
Warning
indicates
a potentially hazardous situation
which, if not avoided, COULD result in
death or serious injury.
Caution
indicates
a potentially hazardous situation
which, if not avoided, MAY result in
minor or moderate injury.
Notice
indicates
important information, that if not
followed, may cause damage to
equipment.
CALIFORNIA PROPOSITION 65
You can create dust when
you cut, sand, drill or grind
materials such as wood, paint, metal,
concrete, cement, or other masonry.
This dust often contains chemicals
known to cause cancer, birth defects,
or other reproductive harm. Wear
protective gear.
Operating Instructions Model SB504000
BUILT TO LAST
2" 2-in-1
Nailer/Stapler
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death and/or
property damage! Retain instructions for future reference.
Model SB504000
IN717700AV 1/07
Campbell Hausfeld Nailers meet or exceed
Industries’ Standards as set forth by the
American National Standard
Institute/International Staple, Nail and Tool
Association in ANSI/ISANTA SNT-101-2002.
© 2007 Campbell Hausfeld/Scott Fetzer
See Warranty on page 8 for important information about commercial use of this product.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
For parts, product & service information
visit www.chpower.com
Locate model and date code on tool
magazine and body, and record
below:
Model No. ________________________
Date Code ________________
Retain these numbers for
future reference.

Campbell Hausfeld SB504000 Specifications

General

Brand	Campbell Hausfeld
Model	SB504000
Category	Nail Gun
Language	English

Summary

Limited Warranty

Product Description

General Safety Information

Safety Symbols and Warnings

Details key safety symbols (Danger, Warning, Caution, Notice) and specific warnings like California Proposition 65.

General Safety Information (Continued)

Operator and Employer Responsibilities

Outlines the duties and responsibilities of both the tool operator and the employer for safe usage.

Key Safety Precautions

Details critical safety measures for operating the tool, including air supply, handling, and trigger usage.

Tool Components and Specifications

Troubleshooting Guide

Fasteners

Nails

Details specifications for various Campbell Hausfeld nails, including model, length, gauge, and finish.

Staples

Details specifications for various Campbell Hausfeld staples, including model, length, gauge, and finish.

Fastener Interchangeability

Information on compatible nailer/stapler models for Campbell Hausfeld fasteners.

Additional Safety Precautions

Operating The Tool

Lubrication

Instructions for lubricating the tool before first use and before each use, including important notices.

Recommended Hookup

Illustrates the recommended air supply hookup for the tool, including compressor, filter, and oiler.

Single Sequential Mode

Explains the single sequential mode of operation requiring trigger pull for each fastener.

Checking the Work Contact Element (WCE)

Details the procedure for checking the Work Contact Element (WCE) for proper operation before use.

Operating The Tool (Continued)

Loading and Unloading the Tool

Instructions for loading fasteners into the magazine and unloading the tool safely.

Adjusting Fastener Penetration

How to adjust the depth of drive for fasteners using the adjustment wheel.

Adjusting Exhaust Direction

Instructions for adjusting the direction of the exhaust deflector on the tool.

Clearing Jams

Procedure for removing jammed fasteners from the tool, including safety warnings.

Technical Support and Repair

Technical Support

Contact information for questions about tool repair, operation, or manual requests.

Tool Repair and Seal Assembly

Guidelines for tool repair, internal part cleaning, lubrication, and seal assembly.

Fastener and Replacement Parts

Operating The Tool (Continued)

Fastener and Replacement Parts Information

Details fastener specifications and interchangeability information for nails and staples.

Assembly Procedure For Seals

Troubleshooting Guide

Limited Warranty

General Safety Information (Continued)

General Safety Information

Operator Responsibilities

Details operator duties for safe tool use, including reading manuals and wearing protective gear.

Employer Responsibilities

Details employer duties for safe tool use, including providing manuals and ensuring tool maintenance.

Key Safety Precautions

Highlights critical safety measures like using compressed air and avoiding flammable materials.

Tool Components and Specifications

Operating The Tool

Fastener Specifications

Lists specifications for nails and staples, including model, length, gauge, and finish.

General Safety Information (Suite)

Operator Responsibilities

Details user duties for safe tool operation, emphasizing manual adherence and protective equipment.

Employer Responsibilities

Details employer duties, including manual availability and ensuring tool safety and maintenance.

Key Safety Precautions

Highlights critical safety measures for tool operation, including air supply regulations and flammable material avoidance.

Limited Warranty

General Safety (Continued)

Key Safety Precautions

Covers crucial safety measures such as proper tool handling, avoiding discharge areas, and maintenance warnings.

Operating The Tool

Lubrication

Instructions for lubricating the tool before initial use and daily use, with notices on oil types.

Recommended Hookup

Illustrates the recommended air supply connection for the tool, including compressor, filter, and oiler.

Troubleshooting Guide

Provides solutions for common tool problems like air leaks, jams, and slow operation.

Operating The Tool (Suite)

Clearing Jams

Procedure for removing jammed fasteners from the tool, including safety warnings.

Loading and Unloading the Tool

Instructions for loading fasteners into the magazine and unloading the tool safely.

Adjusting Fastener Penetration

How to adjust the depth of drive for fasteners using the adjustment wheel.

Adjusting Exhaust Direction

Instructions for adjusting the direction of the exhaust deflector on the tool.

Technical Support

Fasteners and Replacement Parts

Nails

Details specifications for Campbell Hausfeld nails, including model, length, gauge, and finish.

Staples

Details specifications for Campbell Hausfeld staples, including model, length, gauge, and finish.

Fastener Interchangeability

Information on compatible nailer/stapler models for Campbell Hausfeld fasteners.