Need help?Do you have a question about the Campbell Guardian and is the answer not in the manual?
General| Bulb Type | LED |
|---|---|
| Motion Sensor | Yes |
| Waterproof Rating | IP65 |
| Beam Angle | 120 Degrees |
| IP Rating | IP65 |
| Lifespan | 50, 000 hours |
| Material | Aluminum |
| Color Temperature | 5000K (Daylight) |
This guide covers the installation of the Guardian Pedestrian System. It does not cover configuration.
Provides references to user manuals, worksheets, quick guides, and mounting templates for related information.
Details primary contact points for support, starting with the distributor and then Campbell Company.
Lists the required components for Guardian and Guardian 400A installations, including hardware and signs.
Explains how to orient the tactile arrow to the crossing destination and mentions an angle mounting kit.
Step-by-step instructions for drilling and tapping a pole and mounting the pedestrian station.
Describes routing cables, connecting wires, and securing the pushbutton for the 400A station.
Instructions for installing the Signal Power Interface (SPI), including warnings about water damage and warranty.
Steps to verify the station is securely mounted, the SPI is correctly installed, and functions like locator tone and walk signals.
To Next Page