16 17ENGLISH ENGLISH
9. Firmware Update 10. Specications
Update procedure
From time to time it happens that the firmware of the controller needs to be updated
(eg. change a frequency of the satellite operator or general improvement of the control
unit). You can find the latest firmware from our homepage www.camping-rst.de
1. Copy the firmware file to an appropriate USB
stick. The USB flash drive should be formatted in
FAT32 and do not include other files.
2. Make sure that the control unit is turned off at
the main switch.
3. Insert the USB flash drive with the new firmware
into the USB socket on the front.
4. Now switch on the control unit. The control unit
boots and starts the update process automati-
cally. IMPORTANT: Do not turn o the con-
trol unit during the update procedure in
order to avoid any damage!
5. After a successful update, the control unit swit-
ches off and restarts automatically. The update
process is now complete. The current firmware
is displayed shortly after the boot process on
the display.
Note:
Weight and dimensions are not absolutely exact values .
Technical details can be changed at any time without prior notice.
Excerpt from the Declaration of Conformity
Hereby, New Line Trading UG (haftungsbeschränkt) declares that the following product
is in compliance with the essential requirements and other relevant provisions of direc-
tives 2014/30/EU (EMC), 2014/35/EU (LVD) and 2014/53/EU (RED):
Camping rst Satmex Flat (Art-No. 600103)
The Declaration of Conformity for the product is located at the company:
New Line Trading UG (haftungsbeschränkt)
Nelkenweg 23
D-98617 Obermaßfeld-Grimmenthal
The declaration of conformity can be downloaded from our homepage:
www.camping-first.de/support/downloads
Antenna typ Flat antenna
User 2
LNB typ Universal LNB
Frequenzy band Ku Band
Frequenzy range 10.7 GHz to 12.75 GHz
LNB gain 33 dBi
Minimum EIRP 49 dBW
Polarization V/H
Motor 2-Axis DC Motor
Elevation 0° to 90°
Azimuth 365°
Auto Skew yes
Operating temperature -20° C to +60° C
Power supply 12 V DC @ 3 Ampere
Weight 7 kg
Dimensions dish 525 x 290 mm (W/H)
Dimensions antenna 525 x 150 x 480 mm (L/W/H)
Dimensions control unit 200 x 45 x 134 mm (W/H/D)
To Next Page
Loading...
