To Next PageTo Next PageWhy won't my Campingaz Burner light?
There could be several reasons why your burner won't light: a lack of gas supply, a malfunctioning regulator, blockages in the hose, valve, Venturi tube, or burner openings, or the Venturi tube might not be seated correctly over the jet.
Why won't my Campingaz Plancha BF EX light with the igniter?
If your burner lights with a match but not with the igniter, the igniter button, wire, or electrode may be faulty. Check the igniter cable connections and the condition of the electrode and connection wire.
What to do if there is a fire at any connection on my Campingaz Plancha BF EX?
If you notice a fire at any connection, it is likely due to a leaking connection. Immediately turn off the gas supply to address this issue.
What to do if my Campingaz Plancha BF EX Burner has fire under the control panel?
If there is a fire under the control panel, immediately turn off the appliance and close the gas cylinder.
What to do if my Campingaz Plancha BF EX has fire behind control knob?
If you observe a fire behind the control knob, it indicates a potentially defective valve. Immediately turn off the appliance.
What to do if my Campingaz Burner ‘pops’ or blows itself out?
If your burner 'pops' or blows itself out, check the gas supply and hose connections.
Why are there large flames on the surface of my Campingaz Plancha BF EX Burner?
Large flames on the surface of the burner can occur if the jet nozzle is badly connected to the Venturi tube, in this case adjust the Venturi tube, or if the Venturi tube is clogged, then clean the Venturi tube.
Why is the flame low on the jet of my Campingaz Plancha BF EX Burner?
A low flame on the jet usually means the bottle is almost empty. Change the bottle, and the problem should disappear.
How to fix sputtering unsteady flames on my Campingaz Plancha BF EX Burner?
Sputtering, unsteady flames may occur when using a new bottle, as it may contain air. Continue using the burner, and the problem should resolve itself.
General
