What to do if Campomatic wm708 Washer is overflowing?
If water is overflowing from the bottom of your Campomatic washer, it could be due to the inlet pipe not being firmly connected; ensure it is properly fixed. Another possible reason is the drain hose; consider replacing it.
What to do if Campomatic Washer door won't open?
If your Campomatic Washer door won't open, the machine's safety protection design may be active. Disconnect the power to resolve this.
Why is Campomatic wm708 Washer not draining?
If your Campomatic Washer isn't draining properly and the drain time exceeds 3 minutes, the outlet hose might be blocked or twisted. Try washing and straightening the outlet hose. Alternatively, the drain pump could be blocked; in this case, wash the drain pump filter.
Why Campomatic Washer is not injecting water properly?
If your Campomatic Washer is experiencing water injection problems, with the water injecting time exceeding 7 minutes, the tap might not be fully opened, or the water flow could be too slow; ensure the tap is open or wait for normal water supply. Also, the inlet valve filter could be blocked; check it. A twisted inlet pipe can also cause this issue; straighten the water pipe. Check the other taps in the room to ensure water supply.
What to do if indicator light is not working on Campomatic Washer?
If the indicator or PC board on your Campomatic Washer is acting up, first check if the power is shut down and the power plug is correctly connected. If the problem persists, it might be a harness connection issue, and you should call the service line.
Why is my Campomatic wm708 leaking water?
If you notice water leakage from your Campomatic Washer, the water pipes or outlet hose and tap might not be tight. Check and fasten the water pipes. Also, the drain pipe in the room could be blocked. Clean up the outlet hose, and if necessary, ask a specialized person to repair it.
What to do if Campomatic wm708 Washer door won't lock?
If your Campomatic Washer door is not locking, it might be because the door isn't closed properly. Try restarting the washer after ensuring the door is securely closed.
Why Campomatic wm708 Washer washing effects are not good?
If your Campomatic Washer isn't cleaning clothes effectively, it might be because the clothes are excessively dirty. Add the proper detergent quantity according to the instructions in the detergent package. Insufficient detergent quantity can also cause this issue; again, add the proper amount as instructed.
Why is washing powder clumping in my Campomatic wm708?
If the washing powder in your Campomatic Washer is dampened and agglomerated, it could be due to detergent residues in the box. Clean and wipe the box. You might also consider using liquid detergents or detergents specifically designed for drum washers.
Why Campomatic wm708 is making noise?
If your Campomatic Washer is making abnormal noises, check if there are any barrettes or metal articles inside. Also, make sure the legs of the washing machine have been removed. Ensure the cabinet is installed on a solid and level floor and check the legs of the washing machine.
General safety warnings, including electrical hazards, children's safety, and maintenance.
Steps for unpacking, checking for damage, and removing transport bolts.
Instructions for connecting the water inlet pipe and positioning the outlet hose for drainage.
Guidelines for safely connecting the washing machine to the electrical power supply.
A guide to identifying and resolving common washing machine issues.
General| Capacity | 7 kg |
|---|---|
| Energy Efficiency Class | A++ |
| Spin Speed | 1000 RPM |
| Noise Level (Washing) | 58 dB |
| Noise Level (Spinning) | 76 dB |
To Next Page
