Need help?Do you have a question about the CanadianSolar CSI-7K-S22003-E and is the answer not in the manual?
General| Model | CSI-7K-S22003-E |
|---|---|
| Type | String Inverter |
| Rated Output Power | 7000 W |
| Max. DC Power | 10500 W |
| Number of MPPTs | 2 |
| Nominal AC Power | 7000 W |
| Nominal Grid Frequency | 50/60 Hz |
| Total Harmonic Distortion | <3% |
| Power Factor | >0.99 |
| DC Connection | MC4 |
| Protection Degree | IP65 |
| Operating Temperature Range | -25°C to +60°C |
| Cooling Method | Natural Convection |
| Max. DC Input Power | 10500 W |
| Max. AC Power | 7000VA |
| Nominal AC Voltage | 230 V |
| AC Voltage Range | 180-280 V |
Provides basic information about the manual and the inverter models it covers.
States the terms and conditions regarding the information provided in the manual.
Outlines the manufacturer's responsibility for damages related to the inverter.
Specifies the intended audience for this user manual.
Explains the meaning of symbols used in the manual and on the product.
General safety precautions to be observed when installing and operating the inverter.
Specific instructions and requirements for using the inverter safely.
Describes the function and components of the PV grid-connected system and inverter.
Shows the front and bottom views of the inverter with labeled parts.
Details the information found on the inverter's nameplate, including model and specifications.
Lists general requirements for installing the inverter safely and effectively.
Provides instructions and diagrams for mounting the wall bracket.
Details the steps for hanging and securing the inverter onto the wall-mounting bracket.
Highlights critical safety warnings related to electrical connections and voltages.
Specifies the types, cross-sections, and outer diameters of recommended cables.
Briefly mentions the integrated export limitation functionality and the need for a meter or CT.
Explains how to connect the PE cable for ground protection.
Provides instructions for wiring the AC output, including circuit breaker recommendations.
Details the requirements and procedures for connecting the DC input from PV arrays.
Explains the connection for demand response mode using an RJ45 socket.
Describes how to connect for inverter monitoring via a data logger.
Lists checks for PE connections and DC voltage values before commissioning.
Details checks for proper installation, cable connections, and seals.
Explains the startup sequence and operating states of the inverter.
Describes the meaning of different LED indicators and their corresponding states.
Provides the procedure for safely shutting down and switching off the inverter.
Explains how LED colors and flashing statuses indicate inverter faults or warnings.
Describes error codes, their meanings, and suggested corrective actions.
Step-by-step guide for safely removing the inverter.
Instructions on how to pack the inverter for storage or transport.
Guidance on the proper disposal of obsolete inverters.
Schematic diagram showing the installation of a single inverter in a PV system.
Schematic diagram illustrating the installation of multiple inverters in a three-phase system.
Defines the purpose and applicability of the CT installation guide.
Lists the technical specifications of the CT sensor.
Covers system diagrams, wiring, CT mounting, and inverter settings.
Defines the purpose and applicability of the single-phase meter installation guide.
Lists the technical specifications of the single-phase meter.
Provides instructions for system diagrams, wiring, and meter installation.
Introduces the CSI CloudPro APP for inverter communication and maintenance.
Guides users on how to download and install the CSI CloudPro mobile application.
Explains the steps to log in and register an installer account on the CSI CloudPro Platform.
Details how to enter and use the local mode for connecting to the logger.
Guides on setting inverter parameters locally according to requirements.
Instructions for selecting the country and configuring power derating modes (Volt-Watt).
Explains how to configure reactive power regulation settings using the Volt-Var mode.
Guides on setting overvoltage and underfrequency protection parameters.
Details how to configure the Energy Power Management (EPM) modes.
Explains how to enable and set the soft export limit percentage.
Details how to enable and set the hard export limit percentage.
Instructions for enabling and using the generation limit mode.
Guides on how to exit the local mode in the CSI CloudPro App.
To Next Page
