The Flowermate V5.0S Mini PRO is a non-combustion, multi-use vaporizer designed for dry herbs, oils, and waxy concentrates. It features a fully isolated air path and a borosilicate glass mouthpiece, ensuring clean and pure vapor production. The device is compact, fitting comfortably in the palm of your hand, and includes a power bank feature for charging USB-powered devices.
Function Description:
The V5.0S Mini PRO is primarily a dry herb vaporizer, but it can also be used with oils and waxy concentrates through dedicated chambers. It operates on a non-combustion principle, heating materials to produce vapor without burning them. The device offers full range temperature control, allowing users to customize their vaping experience. Its power bank function enables it to charge other USB-powered devices, making it a versatile tool.
Important Technical Specifications:
- Dimensions: 3.31”H x 0.79”D x 1.79”W (84mmH x 20mmD x 45.5mmW)
- Display: OLED display with full range temperature control
- Temperature Range: 104°F-446°F (40°C-230°C)
- Battery Capacity: 1800mAh Lithium-Ion battery
- Nominal Output Voltage: 3.7V
- Power On/Off: Press power button 5 times consecutively
- Safety Power Duration: 5 minutes (automatic shut-off)
- Battery Low Indicator: Battery icon flashes 6 times rapidly
- Safeguard: Dual PCB/IC protection
- USB Output (Power Bank): 5V/1000mA (1.5A maximum for quality test)
- Air Path: Fully isolated from electronics
- Mouthpiece: Borosilicate glass
- Heating Chamber: Ceramic
Usage Features:
- Power On/Off: Rapidly press the power button five times within 2 seconds. To power off, repeat the action.
- Heating Activation: Press and hold the power button for 2 seconds to activate heating. The device will heat to the last used temperature (memory function).
- Temperature Control: Use the “+” and “-” buttons to adjust the temperature in 1° increments. Press and hold “+” or “-” for one second to automatically increase/decrease temperature.
- Fahrenheit/Celsius Toggle: Press and hold the “+” and “-” buttons simultaneously to switch between Fahrenheit and Celsius.
- Loading Dry Herbs:
- Open the bottom slider and remove the mouthpiece from its storage compartment.
- Insert the screen into the ceramic heating chamber.
- To use with Medium Stainless Steel Pods: Unscrew the pod lid, loosely fill with your blend (using Load’X Grinder & Loader is recommended for mess-free loading), tamp down with the dabber tool, and close the lid. Insert the pod into the ceramic chamber.
- Alternatively, load your choice blend directly into the ceramic heating chamber. Do not over-fill.
- Attach the V5.0S Mini PRO mouthpiece.
- Loading Oil/Waxy Concentrates:
- Oil: Fill the oil/waxy chamber with at least 5 drops (0.2 - 0.3ml) of oil. Allow it to settle. Insert the oil/waxy chamber into the ceramic heating chamber with the lid facing down. Do not turn on the device while loading.
- Waxy: Place concentrated oil around the recess of the lid. Screw the lid onto the oil/waxy chamber. Insert the oil/waxy chamber into the ceramic heating chamber with the lid facing down. Do not turn on the device while loading.
- Airflow Adjustment: Use the bottom slider to regulate the airflow into the chamber.
- Vaping: Inhale slowly through the mouthpiece. The device provides 5 minutes of uninterrupted vaping before entering sleep mode. Press and hold the power button for 2 seconds to resume.
- Water Pipe Adapter: The device can connect with a water pipe adapter (fits 10mm / 14mm / 18mm) for an enhanced vaping experience. One way is for male rigs, and another for female down stems.
- Power Bank Function: Press the on/off button to activate the 5V/1000mA USB output for charging mobile phones. The output stops if no connection is detected for 30 seconds or if the battery voltage drops below 3.1V. Output resumes when a short circuit is eliminated.
- Memory Function: The device memorizes the last used temperature setting and displays it upon powering on for subsequent use.
- Sleep Protection: After 5 minutes of vaping, the device enters sleep mode to prevent over-use. Press and hold the power button for 2 seconds to resume.
Maintenance Features:
- Ceramic Heating Chamber: Use the cleaning brush tool to gently clean the walls.
- Ceramic Filter: Use a fine paperclip or pin to gently insert between the holes and push through to clear the airway, then wipe clean with a lint-free cloth.
- Mouthpiece: Carefully remove the glass mouthpiece, wash gently with warm water, rinse, and air dry. For stubborn stains, gently rub with a damp cotton swab.
- Charging:
- Initially charge for 3.5 to 4 hours. The battery icon will indicate full charge.
- Charge with the included Micro 5 Pin USB Charging cable when the battery level is low (indicated by the battery icon flashing 6 times).
- The OLED display remains lit when charging while powered on; only the battery icon is visible when powered off.
- Important: Do not use the device while charging, do not leave the charger plugged in overnight, and do not charge on bare carpet or rug to prevent overheating and damage.
- Tips for Optimal Performance:
- Do not over-pack the ceramic heating chamber to ensure proper airflow and even vaping.
- After filling, use the packing tool to gently stir and aerate the product.
- Properly prepare the device before use to reduce mouthpiece blockage.
- Regulate airflow using the bottom slider for custom vaping.
- Consider using the Load’X Grinder and Loader (sold separately) for mess-free grinding and loading.
What's in the Box:
- 1 V5.0S Mini PRO Dry Herb Vaporizer
- 1 Borosilicate Glass Mouthpiece
- 1 Water Pipe Adapter (Made with organic cotton)
- 1 Liquid / Waxy chamber
- 5 Stainless Steel Screens
- 1 Medium Stainless Steel Pod
- 1 Packing Tool and Dabber
- 1 Cleaning Brush
- 1 USB Charging cable
- 1 Warranty Information Card
- 1 User Manual
To Next Page
Need help?
General
