Need help?Do you have a question about the Canberra UltraRadiac and is the answer not in the manual?
Instructions for turning the UltraRadiac unit on and off.
Procedure to turn off the unit's Low Level and High Level alarms for Rate and Dose.
Overview of the UltraRadiac's front panel controls and indicators.
Describes the primary function of each of the function keys.
Explains the two battery life indicators and their meaning.
Instructions for attaching the belt clip and using the carrying case.
Procedures for powering on the unit and performing initial operational tests.
Details on performing display sequence tests and checking alarm functionality.
Procedures for testing Sleep Mode, GM Tube Failure, and low temperature operation.
Instructions for configuring Rate and Dose modes and their alarms.
How to enable and configure Source Finder and Sleep modes.
Procedures for capturing, viewing, and clearing data in the Data Logging Mode.
Steps for cleaning the unit and installing or replacing batteries.
Inspection and proper latching of the battery compartment door.
Overview of the UltraRadiac's features, detector type, and energy dependence.
Specifications for the display, alarms, units, and power requirements.
Details on operating conditions, environmental resistance, and physical dimensions.
General| Display | LCD with backlight |
|---|---|
| Power Source | 2 x AA batteries |
| Dose Rate Units | µSv/h, mSv/h |
| Operating Temperature | -20 °C to +50 °C |
| Accuracy | ±15 % |
To Next Page
