8
SOUNDER DURATION (sounder ring time) 3-2 (Range 3-20 minutes)
Enter 3-2. This has been preset to a factory default of 15 minutes. A new time
may be programmed by entering one key from the following table. Press * to
confirm the selection. The accept tone will sound.
Enter 1 3 minutes. Led 1 on.
Enter 2 4 minutes. Led 2 on.
Enter 3 5 minutes. Led 3 on.
Enter 4 10 minutes. Led 4 on.
Enter 5 15 minutes. Led 5 on. (default)
Enter 6 20 minutes. Led 6 on.
NIGHT SET / HOME SET EXIT TIME 3-3 (Range 0-90 seconds)
Enter 3-3. This has been preset to a factory default of 15 seconds. A new time
may be programmed by entering one key from the following table. Press * to
confirm the selection. The accept tone will sound.
Enter 0 0 Seconds. All LED's off ( Instant ).
Enter 1 10 Seconds. Led 1 on.
Enter 2 15 Seconds. Led 2 on. (default)
Enter 3 30 Seconds. Led 3 on.
Enter 4 45 Seconds. Led 4 on.
Enter 5 60 Seconds. Led 5 on.
Enter 6 90 Seconds. Led 6 on.
NOTE: The exit sounder volume can be altered by the control on the PCB marked
VOLUME or RV1. Please note, this will not apply to keypad bleepers.
Option Option Results from choosing option no.
Code Description 0 1 2 3 4 5 6
3-0 Exit Time (secs) 10 15 30 45 60 90
3-1 Entry Time (secs) 10 15 30 45 60 90
3-2 Sounder Duration (mins) 3 4 5 10 15 20
3-3 Night / Home Exit (secs) 0 10 15 30 45 60 90
Examples
Change the FULL set exit time to 60 seconds
ENTER THIS 3-0 5 *
Description Choose full set Select 60 seconds Confirm selection
Change the Sounder duration to 3 minutes
ENTER THIS 3-2 1 *
Description Choose
sounder
Select 3 minutes Confirm selection
Change the ENTRY time to 45 seconds
ENTER THIS 3-1 4 *
Description Choose entry Select 45 seconds Confirm selection
SOUNDER
DURATION
NIGHT / HOME
SET EXIT TIMER
SUMMARY
To Next Page
Loading...
