What to do if my Candy AQUA 80F Washer does not spin?
If your Candy Washer isn't spinning, consider these possible causes: * Wait a few minutes until the machine discharges water. * If your model has a 'No spin' setting, turn the program dial to the spin setting.
What to do if there is water on floor around Candy washing machine?
If you find water on the floor around your Candy washing machine, it might be due to a leak from the washer between the tap and inlet tube. In this case, replace the washer and tighten the tube on the tap.
Why Candy AQUA 80F does not load water?
If your Candy Washer isn't loading water, here's what you should check: * Turn on the water inlet tap. * Set the timer to the correct position.
How to fix Candy AQUA 80F that does not discharge water?
If your Candy Washer isn't discharging water, consider the following: * Ensure the discharge tube is not bent; straighten it if necessary. * Check the filter for any material blocking it.
What to do if my Candy AQUA 80F Washer does not function on any programme?
If your Candy Washer isn't working on any program, here are a few things to check: * Make sure the mains plug is properly inserted. * Ensure the mains switch is turned on. * Check that there is power. * Inspect the electric circuit fuses. * Confirm that the load door is completely closed.
Why Candy AQUA 80F has strong vibrations during spin?
If your Candy Washer is vibrating strongly during the spin cycle, here are a few things to investigate: * Ensure the washing machine is perfectly level by adjusting the special feet. * Check that the transport bracket has been removed. * Make sure the washing load is evenly distributed inside the drum.
General| Water consumption per cycle | 42 L |
|---|---|
| Energy consumption washing per cycle | 0.66 kWh |
| Annual water consumption washing | 8400 L |
| Annual energy consumption washing | 132 kWh |
| Door hinge | Right |
| Loading type | Front-load |
| Drum material | Stainless steel |
| Product color | White |
| Appliance placement | Freestanding |
| Drum capacity | 3.5 kg |
| Cycle time (max) | 130 min |
| Residual moisture | 71 % |
| Maximum spin speed | 800 RPM |
| Number of washing programs | 4 |
Weight and Dimensions| Depth | 440 mm |
|---|---|
| Width | 510 mm |
| Height | 695 mm |
On delivery, check that the following are included with the machine and store documents safely.
The appliance is supplied with a guarantee certificate which allows free use of the Technical Assistance Service.
Covers electrical safety, usage rules, temperature warnings, and child supervision.
Lists key technical specifications such as load capacity, power, and dimensions.
Covers moving the machine, removing packaging, and basic setup precautions.
Details connecting water, levelling, and tap operation during setup.
Important safety instructions for replacing the power supply cord.
Describes the door handle operation and the door locked indicator light.
Explains the functions of the Start, Pause, and Cancel buttons.
Details buttons for Cold Wash, Start Delay, Spin Speed, and related indicators.
Explains button indicator lights and the operation of the programme selector.
Provides an introduction and notes for selecting the correct wash programme.
A comprehensive chart outlining all available wash programmes and their settings.
Introduces the different programme categories based on fabric type and dirt level.
Details programmes for resistant, mixed, synthetic, delicate fabrics, and special cycles.
Explains the detergent drawer compartments and provides usage and safety warnings.
Offers advice on washing heavy items and sorting laundry before washing.
Provides guidance on efficient and economic use of the appliance.
Describes the automatic water level adjustment and the general washing process.
Covers exterior cleaning, drawer cleaning, filter cleaning, and long-term storage.
Lists common problems, their causes, and recommended solutions.
Highlights the electronic device for load balancing and its benefits.
To Next Page