Candy Brava CDIN 2D620PB-80E - Remote Control (Wi-Fi); Pairing the Machine with the App; Enrollment and Connection Status; Enabling Remote Control Operation

28
16. REMOTE CONTROL (WI-FI)
This appliance is equipped with Wi-Fi
technology that allows the machine to be
remote controlled via an app.
 Download the Candy simply-Fi app onto
your device.
 Make sure the router is turned on and
your smartphone/tablet is connected to
your home Wi Fi network.
 Turn on BLUETOOTH on your
smartphone/tablet (if available).
 Open the app, create a user profile and
enroll the appliance, following the
instructions appearing on the device’s
display.
 Turn on the dishwasher by pressing the
ON/OFF button for 3 seconds when
instructed to do so in the app.
 Press "PROGRAMME SELECTION" for
3 secs  the message "ENROLMENT"
will scroll on the display and the "Wi-Fi"
indicator light will be off.
 Within 60 secs. keep the "DELAY START"
button pressed for 3 secs., and the
message "EASY" will appear on the
display for 5 mins, the Wi-Fi indicator
light will start to flash slowly 3 times and
then turn off for 2 seconds.
 Enter the password of your home WiFi
network in the App and complete the
procedure.
Successful enrollment
 The message "CONNECTED" will appear
on the display once, after which the message
"REMOTE CONTROL" will appear and
the "Wi-Fi" indicator light will be steady on.
 You can now check the machine from the
App.
Unsuccessful enrollment
If enrolment fails (or does not succeed
within 5 mins.):
 "TRY AGAIN" will appear on the display.
 The machine will not be connected.
 Repeat the enrolment procedure from the
App.
For more information, refer to the
“Enrollment App - Quick Guide" that
comes with your machine, also accessible at
the link: go.candy-group.com/bm-dw
Repeat the enrolment procedure, removing
the product from the APP, in the event of
problems or a change in your home router
password.
Whenever you want to use the machine
with remote control:
 Fill the dishwasher, add detergent, and
close the door.
 Turn on the dishwasher.
 Press "PROGRAMME SELECTION" for
3 secs.  The message "REMOTE
CONTROL" will appear on the display.
 Close the door.
 You can now check the machine from the
App.
ENABLING REMOTE CONTROL
Reset WiFi
To discover all the details of the Wi-Fi
features, explore the app menus in
DEMO mode.
The Candy simply-Fi app is available
both for Android and for iOS tablets
and smartphones.
Pairing the machine with the app