Candy CBD485D2BBE/-80

Questions and Answers

M
Mary JohnsonAug 7, 2025
What to do if my Candy CBD485D2BBE/-80 does not spin?
- K
  Kevin BarnesAug 7, 2025
  If your Candy Washer/Dryer isn't spinning, here's what you can do: 1. Try to remove the load, de-tangle it, reload it, and restart the spin program. 2. Wait a few minutes to see if the water drains completely. If it doesn't, it might be related to an error (see Error 3 section). 3. Check if the "no spin" function is activated and disable it if it is. 4. Review your selected options, as they might be affecting the spin cycle. 5. Make sure you're using the right amount of detergent, as too much can hinder spinning.
C
cgilmoreAug 11, 2025
What does E3 error mean on Candy Washer/Dryer?
- T
  tsmithAug 11, 2025
  If your Candy Washer/Dryer displays error code E3 or 3 LED flashes, check that the filter isn't clogged and that there are no foreign objects blocking water flow inside the filter compartment. Also, make sure the drain hose isn't bent, kinked, or trapped and that your home drainage system isn't blocked.
C
Christy UnderwoodAug 15, 2025
What does E2 error mean on Candy Washer/Dryer?
- D
  David RodriguezAug 15, 2025
  If your Candy Washer/Dryer shows error code E2 or flashes the LEDs twice, make sure the water supply tap is open and the water supply hose isn’t bent, kinked, or trapped. Ensure the drain pipe is at the correct height (refer to the installation section). Also, close the water supply tap, detach the filler hose, and clean the “anti-sand” filter. Lastly, check that the filter isn't clogged and that no foreign objects are obstructing water flow inside the filter compartment.
W
woodalanAug 20, 2025
What does E4 error mean on Candy CBD485D2BBE/-80 Washer/Dryer?
- T
  Theresa ChapmanAug 20, 2025
  If your Candy Washer/Dryer displays error code E4 or flashes the LEDs four times, ensure you are using the correct amount of detergent and that it is designed for use in a washing machine.
A
alexanderlloydAug 25, 2025
How to reduce vibrations of my Candy CBD485D2BBE/-80 Washer/Dryer during spin cycle?
- T
  Thomas EdwardsAug 25, 2025
  If your Candy Washer/Dryer is vibrating excessively or making loud noises during the spin cycle: * Ensure the appliance is properly leveled by adjusting the feet as needed. * Verify that all transport screws, rubber bungs, and spacer tubes have been removed. * Check the drum for any foreign objects like coins, hinges, or buttons.
A
Andrew MccoyAug 28, 2025
What to do if my Candy Washer/Dryer displays E7 error?
- T
  Tammy BaileyAug 28, 2025
  If your Candy Washer/Dryer shows error code E7 or 7 LED flashes, ensure the door is correctly closed and that no clothing is preventing it from fully closing. If the door is locked, switch off and unplug the appliance, wait 2-3 minutes, and then try reopening the door.
K
Katherine WilliamsSep 2, 2025
Why is my Candy Washer/Dryer leaking water?
- S
  salasdavidSep 2, 2025
  If you notice water leaking near your Candy Washer/Dryer, it could be due to a leak from the seal between the tap, supply hose, and fill valve. If so, replace the seal and tighten the hose connections properly. Also, ensure that the front filter is correctly closed.

Candy CBD485D2BBE/-80 Specifications

General

Model Number	CBD485D2BBE/-80
Loading Type	Front Loading
Washing Capacity	8 kg
Drying Capacity	5 kg
Maximum Spin Speed	1400 rpm
Energy Efficiency Class Washing	A
Spinning Efficiency Class	B
Weight	66 kg
Color	White
Delay Start	Yes
Child Lock	Yes
Display Type	Digital
Type	Washer Dryer
Dimensions (H x W x D)	850 x 600 x 600 mm