EasyManuals Logo

Candy CDI 2212 User Manual

Candy CDI 2212
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
17
1
2
3
CLEANING THE FILTERS
The filter system (fig.A “4”) consists of:
a central container that traps the larger
particles;
a flat gauze that continuously filters the
wash water;
a micro filter, located beneath the gauze,
that traps the tiniest particles ensuring a
perfect rinse.
To achieve excellent results every time,
the filters should be checked and
cleaned after each wash.
To remove the filter unit, simply turn the
handle anticlockwise (fig. 1).
For ease of cleaning, the central container
is removable (fig. 2).
Remove the gauze filter (fig.3) and
wash the whole unit under a jet of
water. If necessary a small brush can
be used.
With the Self-cleaning Micro filter,
maintenance is reduced and the filter
unit need only be checked every two
weeks. Nevertheless, after each wash it
is advisable to check that the central
container and the gauze filter are not
clogged.
WARNING!
After cleaning the filters, make sure
that they are correctly reassembled
and that the gauze filter is properly
positioned at the bottom of the
dishwasher.
Make sure that the filter is screwed
back, clockwise, into the gauze, as
poor seating of the filter unit could
have an adverse effect on the
efficiency of the appliance.
IMPORTANT
Never use the dishwasher without
the filters.
LOADING THE RINSE AID
The rinse aid
The rinse aid, which is automatically
released during the last rinsing cycle, helps
the dishes to dry quickly and prevents
spots and stains forming.
Filling the rinse aid container
The rinse aid container can be found to the
left of the detergent container (fig. A "3").
To open the lid, push the reference mark
and, in the same time, pull the tab of
opening.
It is always advisable to use rinse aid that
is specifically designed for dishwasher.
Check the rinse aid level through the
indicator eye (C) which is located on the
dispenser.
Regulating the rinse aid from 1 to 6
The regulator (D) is placed under the lid
and can be turned using a coin.
The recommended position is 4.
The limestone content of the water
considerably affects the formation of
limescale and the drying performance.
It is therefore important to regulate the
quantity of rinse aid to achieve good
washing results.
If, after the wash, streaks occur on the
dishes, decrease the amount by one
position. If whitish spots occur, increase the
amount by one position.
16
FULL EMPTY
dark light
C
D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Candy CDI 2212 and is the answer not in the manual?

Candy CDI 2212 Specifications

General IconGeneral
Door colorNot applicable
Control typeButtons
Built-in displayNo
Appliance placementFully built-in
Control panel colorBlack
Half-loadYes
Noise level52 dB
Dishwashing programsAuto 65-75°C
Number of place settings12 place settings
Number of washing programs5
Drying classA
Water consumption per cycle- L
Energy consumption per cycle1.05 kWh
Package depth675 mm
Package width640 mm
Package height890 mm
Package weight38000 g
Weight and Dimensions IconWeight and Dimensions
Depth570 mm
Width598 mm
Height820 mm
Weight35200 g

Related product manuals